Multi-Function Display - Yamaha XJR1300 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
When the tachometer displays an er-
ror code, the vehicle should be
checked as soon as possible in or-
der to avoid engine damage.
3
ECA10040

Multi-function display

1. Clock
2. Fuel meter
3. Odometer/tripmeters
4. "RESET" button
5. "SELECT" button
The multi-function display is equipped
with the following:
G
an odometer (which shows the to-
tal distance traveled)
G two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel meter
G
a clock
EAU33572
NOTE:
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons.
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. The tripmeters can be
used to estimate the distance that can
be traveled with a full tank of fuel. This
information will enable you to plan fu-
ture fuel stops.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards "E" (Empty) as the fuel level
decreases. When only one segment is
left near "E", refuel as soon as possible.
3-6