Helmet Holder; Storage Compartment - Yamaha XJR1300 Owner's Manual

1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
NOTE:
Make sure that the seat is properly se-
cured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1. Unlock.
To open the helmet holder, insert the
key into the seat lock, and then turn the
key as shown.
To lock the helmet holder, turn the key
to the original position, and then re-
move it.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-15
EAU14350

Storage compartment

1. U-LOCK bar (optional)
2. Strap
3. Lock of U-LOCK (optional)
This storage compartment is designed
to hold an optional genuine Yamaha U-
LOCK. (Other locks may not fit.) When
placing a U-LOCK in the storage com-
partment, securely fasten it with the
EWA10160
straps. When the U-LOCK is not in the
storage compartment, be sure to se-
cure the straps to prevent losing them.
When storing the owner's manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get wet.
EAU14411
3