Special Features; Cruise Control System - Yamaha TRACER 9 GT 2022 Owner's Manual

Cruise control system

This model is equipped with a cruise
control system designed to maintain a
set cruising speed.
The cruise control system operates
only when riding in 4th, 5th or 6th gear
at speeds between about 50 km/h (31
mi/h) and 160 km/h (99 mi/h).
WARNING
 Improper use of the cruise con-
trol system may result in loss of
control, which could lead to an
accident. Do not activate the
cruise control system in heavy
traffic, poor weather conditions,
or among winding, slippery,
hilly, rough or gravel roads.
 When traveling uphill or down-
hill, the cruise control system
may not be able to maintain the
set cruising speed.
 To prevent accidentally activat-
ing the cruise control system,
turn it off when not in use. Make
sure that the cruise control sys-
tem indicator light "
EAU92921
EWA21180
1. Cruise control system indicator light "
2. Cruise control setting indicator light "
1. Cruise control setting switch "RES+"
2. Cruise control power switch "
3. Cruise control setting switch "SET–"
" is off.
Activating and setting the cruise
1 2
control system
"
"
1 1
Adjusting the set cruising speed
2 2
While the cruise control system is op-
erating, push the "RES+" side of the
cruise control setting switch to in-
3 3 3
crease the set cruising speed or the
"SET–" side to decrease the set speed.
TIP
"
Pushing the setting switch once will
change the speed in increments of ap-
proximately 2.0 km/h (2.0 mi/h). Hold-
ing the "RES+" or "SET–" side of the
4-1

Special features

1. Push the cruise control power
switch " " located on the left
handlebar. The cruise control sys-
tem indicator light "
on.
2. Push the "SET–" side of the cruise
control setting switch to activate
the cruise control system. Your
current traveling speed will be-
come the set cruising speed. The
cruise control setting indicator
light " " will come on.
" will come
4