Nice Oview Instructions And Warnings For Installation And Use page 5

2
OVIEW INSTALLATION
AS A CONTROL DEVICE
To use Oview as a fixed control for automations, it must be installed in a suit-
able location, out of the reach of children and at a height of at least 150 cm
from the ground.
To mount the device on a wall, use the support supplied in the pack, as shown
in fig. 2.
Then connect Oview to the automation with reference to the instructions in
Chapter 3.
––– OBLIGATIONS FOR THE INSTALLER –––
IMPORTANT – After installing and programming Oview as a control
device, the installer must provide the client with the part of this manual
entitled "User Manual".
Also, if the installer intends the enable the client access to a number of
programming functions, the relative information on these functions must
also be supplied, as specified in the CD "Programmable functions of
devices with BusT4 connector".
2
English – 4