After Sales Service - Miele PW 6241 Operating Instructions Manual

Problem solving guide
Gas system fault
§
Open the gas tap.
Press the start button.
i
If this message appears before a
programme has been started:
^ Open the gas tap and then press the
START button.
If this message appears during a
programme the pressure in the gas supply
has dropped because of other gas heated
appliances operating at the same time.
^ Press the START button.
Gas system fault
§
Call the Service Department
if restart does not work.
i
^ If the programme still will not start please
call the Service Department.
Gas system fault
§
Clean the lint filter.
Press the start button.
i
Clean the lint filter as described in "Cleaning
and care" and then press the START button.
On gas heated machines heavy foaming can
lead to a fault.
Drain valve fault
q
Call the Service Department
if restart does not work.
i
^ Check the on-site drainage system and
then press the START button.
A defective drain valve must be repaired by
a Miele Service technician only.
32
Dispensing system fault
ö
Fill dispenser 1
Press the start button
i
f
Replace the empty container with a full one.
Card fault
§
Card incorrectly inserted in card reader.
i
^ Insert the card the right way round in the
card reader.

After sales service

In the event of any faults please contact your
Dealer or the nearest Service Department.
f
When contacting the Service Department,
please quote the Model, Serial number (SN)
and Material number (M.Nr) of your
machine. These are shown on the data
plate.
f
This is visible above the door aperture or at
the back of the machine.
Please let the Service Department know any
error message that has appeared in the
display.
Should you require spare parts ensure that
you only use original Miele Spare Parts
(and remember to let the Spare Parts
f
Department know the model, serial number
and material number of your machine).
f
f
M.-Nr. 06 572 495