USING THE ANSWERING SYSTEM
Using the Answering
system (Slim8800 ONLY)
Your answering machine records unanswered calls when it is
activated. It can store up to 59 messages within the maximum
recording time of 12 minutes. Each message can be up to 3
minutes long. Your personal outgoing messages can be up to 1
minute long.
Outgoing messages
This is the message your callers hear on the answering machine.
There are two pre-recorded outgoing messages, or you can record
your own.
Answer & Record
The caller can leave a message. The pre-recorded message is
'Hello, your call cannot be taken at the moment, so please leave
your message after the tone.'
Answer Only
The caller can listen to your announcement but cannot leave a
message. The pre-recorded message is 'Hello, your call cannot be
taken at the moment, and you cannot leave a message, so please
call later'.
(Slim8800 ONLY)
To set answer mode
Set your machine to Answer & Record or Answer Only.
1. Press [
] scroll [
] or [
[
].
2. Scroll [
] or [
] to ANSWER MODE and press [
current answer mode is displayed.
3. Scroll [
] or [
] to select ANSWER & REC or ANSWER
ONLY and press [
].
4. Scroll [
] or [
] to display the message type you want:
PERSONALISED to set your own recorded message or
PREDEFINED for the pre-recorded message.
5. Press [
] to confi rm.
If you select personalised you can record, play or delete your own
outgoing message.
1. Press [
] scroll to ANSW MACHINE and press [
2. Scroll [
] or [
] to ANSWER MODE and press [
3. Scroll [
] or [
] to select ANSWER & REC or ANSWER
ONLY and press [
]. Scroll [
PERSONALISED then press [
4. PLAY is displayed. Press [
back.
32
] to ANSW MACHINE and press
]. The
].
].
] or [
] key to select
].
]. Current message is played