USING THE ANSWERING SYSTEM
4. Scroll [
] or [
] to select ON or OFF.
5. Press [
] to confi rm.
To access the answering machine menu via the Calls list
When the
is fl ashing to indicate new messages you can
see caller details via [
] or press [
MACHINE to play new messages.
1. Press [
], CALL LIST is displayed.
2. Press [
], ANSW MACHINE is displayed.
3. Press [
], PLAY is displayed.
4. Press [
], the handset will start the new message
playback. Once all messages are played, the handset will
return to standby.
NOTE
[
During message playback, press
Memory full
The memory is full if there is less than 15 seconds of recording time
left or if the maximum total of 59 messages has been reached.
When the memory becomes full:
•
The LED will fl ash quickly.
•
The
fl ashes quickly on the handset display.
•
The machine will automatically switch to Answer Only mode.
] again to go to ANSW
]
anytime to return to standby.
(Slim8800 ONLY)
If the memory becomes full while a caller is leaving a message,
they will hear a beep and the call is ended.
To set TAM Language
1. Press [
], scroll [
] or [
press [
].
2. Scroll [
] or [
] to ANSW SETTINGS and press [
3. Scroll [
] or [
] to TAM LANGUAGE and press [
36
] to ANSW MACHINE and
].
].