Call Transfer Using Intercom; Phonebook; Add A Phonebook Entry - VTech DS6771-3 User Manual

Call transfer using intercom

While on an outside call, you can use
the intercom feature to transfer the call
from one device to another.
Press INT on the handset during a
1.
call. The current call is put on hold.
Your handset shows Intercom
.
to: Use the dialing keys to enter a
handset number (1-5).
Your handset shows Calling HS X.
The destination handset rings and
shows HS X is calling.
3. To answer the intercom call on the
destination handset, press
/CELL,
, or any dialing key (0-9,
, or
). Both handsets now show
Intercom.
-OR-
To answer the intercom call on the
destination headset, press ON/OFF
key on the headset.
4. To transfer the call, press OFF on the
initiating handset or place the initiating
handset back in the telephone base or
charger.
5. To end the call, press OFF on the
destination handset or place the
destination handset back in the
telephone base or charger.
-OR-
Press ON/OFF key on the headset.
NOTES
• You can cancel the intercom call before it
is answered by pressing OFF.
• If the destination handset does not
answer the intercom call within 100
seconds, or if it is out of range, on a call,
or accessing the phonebook or caller ID
log, your handset displays Unable to call
and then returns to idle mode.
• You can press OFF or MUTE on the
destination handset to temporarily
silence the intercom ringer.
• Only one intercom call can be established
at a time.

Phonebook

The phonebook can store up to
1000 entries, which are shared by all
handsets. Each entry may consist of a
telephone number up to 30 digits, and a
name up to 15 characters.
Any additions, deletions or edits made
on one handset will be reflected on
other handsets.
If the telephone number in the
phonebook exceeds 15 digits, a dash
appears after the 14th digit and then the
remaining digits are shown beginning
/HOME,
with a dash alternately.

Add a phonebook entry

1. Enter the number when the handset
is not in use. Press SELECT, then go
to Step 5.
-OR-
Press MENU when the handset is not
in use.
. Press
and then press SELECT.
3. Press SELECT again to choose Add
new entry.
4. When Enter number
displays, use the
dialing keys to enter
a number (up to 30
digits).
-OR-
Copy a number from the redial list by
pressing REDIAL. Then press
,
the desired number. Press SELECT
to copy the number.
Press SELECT to move on to the
5.
name.
30
to choose Phonebook,
or
or REDIAL repeatedly to find
Enter number
-
ECO
ANS ON