NOTES
The handset displays Unable to call if
•
your cell phone is in use.
•
The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
•
While entering numbers, press DELETE
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
Answer a cell call
/CELL,
Press
(0-9,
or
) to answer.
NOTE
•
You can also use your cell phone to
answer the call. If you answer with your
cell phone, it will disconnect from the
telephone base.
End a cell call
Press OFF on the handset, place the
handset in the telephone base or
handset charger.
Answer a cell call while on a
home call
While you are on a home call and you
receive an incoming cell call, you hear
a beep, and your handset flashes
The telephone base and all other
handsets ring.
To answer the incoming cell call:
/CELL on the handset. The
Press
home line is put on hold.
To resume the home call on hold:
/HOME on the handset.
Press
, or any dialing key
Answer a home call while on a
cell call
While you are on a cell call and you
receive an incoming home call, you
hear a beep, and your handset flashes
. The telephone base and all other
handsets ring.
To answer the incoming home call:
/HOME on the handset. The
Press
cell line is put on hold.
To resume the cell call on hold:
/CELL on the handset.
Press
Speakerphone
When the handset is on a call, press
to switch between the speakerphone
and the handset earpiece. When the
speakerphone is active, the handset
displays Speaker.
Volume
During a call, press
VOLUME/
or VOL- on the headset to adjust the
listening volume.
If this is a cell call and the volume is too
.
loud or quiet, try changing the volume
on your cell phone. On some cell
phones, changing the volume on the
cell phone affects your cell call volume
on the DS6771 handset.
NOTES
•
The handset and speakerphone volume
settings are independent.
•
When the volume reaches the minimum
or maximum setting, you hear two beeps.
6
/VOLUME or
on the handset, or VOL+