Position The Headset; Replace The Pre-Installed Earbud And Earhook - VTech DS6771-3 User Manual

Position the headset

There are four earbuds and four
earhooks provided. One earbud and
one earhook have been attached to the
headset.
You can choose a suitable size of
earbud, earhook and an appropriate
way to position your headset.
Replace the pre-installed earbud
and earhook
1. Hold both sides of the earbud. Twist and
pull the earbud until it separates from the
earpiece.
. Rotate the earhook to vertical direction
and then pull the earhook until it
separates from the headset.
3. Attach a earhook, and then a suitable
earbud to the headset until they fit into
place.
To wear on the right ear:
To wear on the left ear:
4. Wrap the earhook with the sponge.
10