Auto Connection; Connect A Paired Cell Phone Or Headset; Disconnect A Paired Cell Phone Or Headset; Review The Cell Devices List - VTech DS6771-3 User Manual

Dect 6.0 cordless telephone with bluetooth wireless technology
Hide thumbs Also See for DS6771-3:
Table of Contents

Advertisement

Auto connection

A cell device may be disconnected from
the telephone base when:
The Bluetooth feature of your
connected cell device is turned off.
The power of your cell device is
turned off.
Your cell device is not within range of
the telephone base.
After the cell device is disconnected,
wait for about 1 minute. Then, power on
the cell device, turn on the Bluetooth
feature, or move it within range of the
base, the base will try to reconnect to
the cell device. If you disconnect the
cell device from the cell devices list,
the base will not attempt to reconnect
unless your cell device is moved out of
range and back in range again.
NOTE
If your cell device does not reconnect to
the base automatically, follow the section
below to connect it manually.
Connect a paired cell phone or
headset
If you need to connect your paired cell
phone or headset to the telephone
base manually:
Press CELL 1 and/or CELL 2 on the
1.
telephone base when it is not in
use. The CELL 1 and/or CELL 2
light flashes.
.
When the cell phone or headset is
connected to the telephone base, you
hear two beeps. The corresponding
status icon (
1
The corresponding device light
(CELL 1 and/or CELL 2 ) turns on.
/
) displays.
2
Disconnect a paired cell phone
or headset
If you need to disconnect a paired cell
phone or headset from the telephone
base, refer to the user's manuals of your
cell phone or headset for instructions to
disconnect a Bluetooth device.
If you press and hold CELL 1 and/or
CELL 2 on the telephone base, the
existing paired cell phone in that slot
will be erased. See Add a Bluetooth
enabled cell phone and Add a
Bluetooth enabled headset on how
to pair and connect a new cell phone or
headset.

Review the cell devices list

1.
Press MENU on the handset when it
is not in use.
.
Press
or
and then press SELECT.
3.
Press
or
and then press SELECT.

Download phonebook contacts

You can download phonebook entries
to your DS6771 telephone system via
Bluetooth wireless technology. Each
downloaded phonebook are stored in
the handset phonebook with up to
4 digits for each phone number and
15 characters for each name.
Before downloading the phonebook,
make sure the cell phone is paired and
connected to the DS6771. Make sure
the handset battery is charged for at
least 10 minutes.
Place your cell phone next to the
telephone base while downloading.
18
to choose Bluetooth,
to choose Device list,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds6722-3

Table of Contents