Operating Instructions, Tips; Control Panel( ) - Maytag MDE2440 Owner's Instructions Manual

Operating Instructions, Tips

Control panel (MDE2440AGW)
1. The Temperature button
To select the correct temperature, in the Cottons cycles(Extra, Cupboard, Iron), press the
Temperature pad. An indicator light will illuminate next to the desired temperature.
Press the pad repeatedly to scroll through the settings.
2. Adjust Time
Time can be added or subtracted from the automatically set times in the Synthetics (Extra,
Cupboard, Iron), Delicates(Cupboard), Airing or Time drying cycles.
To subtract time from the cycle, press the Less Time pad until the desired time is displayed.
To add time to the cycle, press the More Time pad until the desired time is displayed.
3. End of cycle Chime
When the cycle is complete, an audible chime will sound. When the Wrinkle Prevent option
is selected, the chime will sound intermittently.
4. Wrinkle Prevent
Wrinkle Prevent provides approximately 95 minutes of intermittent tumbling in unheated air
at the end of the cycles to reduce wrinkling.
5. Child lock
The control panel can be locked for safety, cleaning or to prevent unwanted use.
The pads will not function when locked.
To lock the controls, press and hold the Chime and Wrinkle Prevent pads for 3 seconds.
The Child lock indicator light will illuminate.
To unlock the controls, press and hold the Chime and Wrinkle Prevent pads for 3 seconds.
The Child lock indicator light will go out.
6. Select Cycle
To select cycle, rotate the control the dial to the desired cycle. The indicator light by the
cycle name will illuminate. Please refer to the Program selecting guide on page 11.
7. Start/Pause
Press this pad to start the dryer. The dryer door must be closed for the dryer to operate.
If the door is opened during the cycle, the Start/Pause pad must be pushed again to resume
the cycle once the door is closed.
8. Power Off
Press the Power Off pad to cancel the cycle and stop the dryer.
8
Clothes Dryers Owner's Instructions
Operating Instructions, Tips
Control panel (MDE2440BGW)
1. The Temperature button
To select the correct temperature, in the Cottons cycles(Extra, Cupboard, Iron), press the Temperature
pad. An indicator light will illuminate next to the desired temperature.
Press the pad repeatedly to scroll through the settings.
2. Adjust Time
Time can be added or subtracted from the automatically set times in the Synthetics (Extra, Cupboard,
Iron), Delicates(Cupboard), Airing or Time drying cycles.
To subtract time from the cycle, press the Less Time pad until the desired time is displayed.
To add time to the cycle, press the More Time pad until the desired time is displayed.
3. End of cycle Chime
When the cycle is complete, an audible chime will sound. When the Wrinkle Prevent option is selected,
the chime will sound intermittently.
4. Wrinkle Prevent
Wrinkle Prevent provides approximately 95 minutes of intermittent tumbling in unheated air at the end
of the cycles to reduce wrinkling.
5. Child lock
The control panel can be locked for safety, cleaning or to prevent unwanted use.
The pads will not function when locked.
To lock the controls, press and hold the Chime and Wrinkle Prevent pads for 3 seconds.
The Child lock indicator light will illuminate.
To unlock the controls, press and hold the Chime and Wrinkle Prevent pads for 3 seconds.
The Child lock indicator light will go out.
6. Select Cycle
To select cycle, rotate the control the dial to the desired cycle. The indicator light by the cycle name will
illuminate. Please refer to the Program selecting guide on page 11.
7. Start/Pause
Press this pad to start the dryer. The dryer door must be closed for the dryer to operate.
If the door is opened during the cycle, the Start/Pause pad must be pushed again to resume the cycle
once the door is closed.
8. Power Off
Press the Power Off pad to cancel the cycle and stop the dryer.
9
Clothes Dryers Owner's Instructions