Steam Cooking - AEG KS8404701M User Manual

Dish
Yeast Dumplings,
salty
Yeast Dumplings,
sweet
Rice
Tagliatelle, fresh
Polenta
When it is necessary to
change the weight or the
core temperature of the
dish, use
the new values.
6.7 Activating a heating
function
1. Activate the appliance.
2. Press
to confirm.
3. Set the temperature.
4. Press to confirm.

6.8 Steam cooking

The water drawer cover is in the control
panel.
WARNING!
Use only cold tap water. Do
not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put
flammable or alcoholic
liquids into the water
drawer.
1. Press the cover of the water drawer
to open it.
2. Fill the water drawer with cold water
to the maximum level (around 950
ml) until the acoustic signal sounds or
the display shows the message.
The water supply is sufficient for
approximately 50 minutes.
Do not fill the water drawer over its
maximum capacity. There is a risk of
water leakage, overflow and furniture
damages.
-
-
-
-
-
or to set
3. Put the water drawer to its initial
position.
4. Prepare the food in the correct
cookware.
5. Activate the appliance.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function
Duration or End Time
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is
at approximately the set
temperature.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
9. Empty the water drawer after the
steam cooking is completed.
Refer to the function: Tank Emptying.
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water drawer.
When the water drawer is
running out of water, an
acoustic signal sounds and
the water drawer needs to
be refilled to continue the
steam cooking as described
above.
Let the appliance dry fully
with the door open.
To speed up the drying you
can heat up the appliance
with hot air at temperature
150 °C for approximately 15
minutes.
Steam can condensate on the bottom of
the cavity and the visibility inside the
appliance can be limited. If this occurs,
dry the cavity when the appliance is cool.
6.9 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
ENGLISH 19
.