Basic Functions - ELPRO DVIPRO1000 Manual

DVIPRO1000

4.0 BASIC FUNCTIONS

Power on the DVIPRO1000 using the switch on the rear panel. The unit will
perform a
(during this phase the whole keyboard blinks red/green) at the end of which it
will switch to the Default condition. The default setting, activated at initial
power-on, is as follows:
Input formats:
In1 - input VGA
In2 - input VGA
In3 - input CVBS
In4 - input CVBS
In5 - input Component
In6 - input Component
In7 - input DVI
In8 - input HDMI (embedded audio)
Output resolutions
Out1- resolution XGA 1024x768 @60Hz
PIP de-activated
Out2 - resolution XGA 1024x768 @60Hz
PIP de-activated
Channel selection
MAIN channel - In1 (VGA) on OUT1 and OUT2
PIP channel - In3 (CVBS) on OUT1 and OUT2
Switching mode
Fading
PIP and Overlay
Disabled
ELPRO Video Labs s.r.l.
8
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
8x2 UNIVERSAL SCALER MATRIX SWITCHER
& EFFECT CONTROL
StartUp phase lasting around 20 seconds,
8