Table of Contents
Advertisement
Quick Links
TZM883V
Variable time switching on the vertical
●
Preview on output 8, programmable
●
Control via RS232, Ethernet and IR
●
8 recallable presets
●
Saving of last configuration
●
IR remote control (optional)
●
Ed. 1 - 22 October 2008
ELPRO Video Labs s.r.l.
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
8x8 GRAPHIC MATRIX
1
1
Advertisement
Table of Contents
Related Manuals for ELPRO TZM883V
Summary of Contents for ELPRO TZM883V
- Page 1 Control via RS232, Ethernet and IR ● 8 recallable presets ● Saving of last configuration ● IR remote control (optional) ● Ed. 1 - 22 October 2008 ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 2: Table Of Contents
TZM883V 8x8 GRAPHIC MATRIX INSTALLATION AND USE OF THE TZM883V SUMMARY 1.0 OVERVIEW…………….………………………………………………………………………4 2.0 POWER SUPPLY ......................5 3.0 PRESETS ........................7 4.0 INSTALLATION ......................7 4.1 Restart ...........................7 5.0 LOCAL CONTROL......................8 5.1 Signal switching ......................9 5.2 How to save and recall a PRESET ................9 6.0 CONFIGURATION.......................10... - Page 3 TZM883V 8x8 GRAPHIC MATRIX When installing the TZM883V unit, please read this handbook carefully. The manufacturer shall not be held responsible for damage due to use, even correct, of its products. The data and characteristics of the product may be modified without prior notice.
-
Page 4: Overview
(To be ordered separately) The TZM883V is an 8X8 matrix for GRAPHIC signals from PC. It is possible to also connect YCbCr/YPbPr component video signals on the three RGB color components of the receptacle connector. The possibility of programming output 8 as preview promotes extremely versatile use of the matrix in certain multi-media applications. -
Page 5: Power Supply
8x8 GRAPHIC MATRIX 2.0 POWER SUPPLY The TZM883V unit must be powered at 90÷240 Vac 50/60Hz using the cable provided. The socket of the cable must be inserted in the related panel plug to the left on the back of the unit. - Page 6 NEUTRAL (Identified with the letter N, may be black) - Yellow/Green GROUND (Identified with the letter E, may be green) WARNING Connection of the conductor to ground is compulsory! ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 7: Presets
At initial power-on, the unit switches to the factory configuration which connects inputs and outputs with the same number (Input 1 with output 1, input 2 with output 2, etc.). ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 8: Local Control
Inputs connected 1 2 3 4 5 • 7 8 to the VIDEO outputs Indicates that output 8 is used as preview output ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 9: Signal Switching
TAKE key, this operation is performed; with CANC or another key, the command is ignored. In this case, switching is not performed "through blank" ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 10: Configuration
8x8 GRAPHIC MATRIX 6.0 CONFIGURATION Certain TZM883V functioning parameters can be configured via the keypad and with the aid of the LCD display. To activate the configuration phase, press the buttons indicated in the screen-printing with MENU at the same time, i.e. - Page 11 DST software, necessary to configure the network interface installed on the matrix. For a more detailed description and for use of this program, refer to the document "LAN202 – User Manual ". The software and related documentation can be downloaded from the Elpro site http://www.elprovideolabs.com/ Network IP address.
- Page 12 If the CANC key is pressed at any time for at least 2 seconds, the configuration phase is exited with return of the matrix to normal functioning. Any modifications made are cancelled. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
-
Page 13: Remote Control Functions
Audio Key not active mute OFF SAVE/RECALL Saves status on preset 1…8 + key INPUTS1..8 SAVE/RECALL Recalls preset 1…8 + key OUTPUTS1..8 ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 14: Connection To Remote Host
TZM883V 8x8 GRAPHIC MATRIX 8.0 CONNECTION TO REMOTE HOST A remote host can be connected to the TZM883V on an RS232 serial line and also via an Ethernet 10/100 base T network. 8.1 RS232 serial connection The serial connection must be made with an RS232 cable crossed wired as... -
Page 15: Commands From Remote Host
8x8 GRAPHIC MATRIX In the Windows © environment, it is possible, for those applications that do not directly interface IP protocols, to manage ELPRO appliances connected via LAN, by creating virtual serial ports. A virtual serial port is created associating a COM port, in addition to those physically existing on the PC, to an IP address of the Ethernet/Internet network. -
Page 16: Video Switching Command
The matrix replies with: <ACK> if the command has been performed successfully <NAK> if transmission errors or invalid control parameters have been detected ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 17: Mute On Preview Output Command
The presets are overwritten; therefore, the settings applied by the host can cancel and replace those of the keypad and vice versa. The host must send the following sequence: ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 18: Preset Recall Command
52 30 35 0D The matrix replies: (Hex 06) if the command has been performed successfully NACK (Hex 15) if transmission errors have been detected ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 19: Default Configuration Set/Clear Command
1 character that indicates the enable status of the last output as preview: "0" : last output used normally "1" : last output used as preview output <CR> 1 end of string character(Hex 0D) ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 20: Set Seamless Times Command
Example: To set a seamless time of 1 second for output 4, the following hexadecimal characters must be sent on line: ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 21: Connection Status Request
Note 2: In this case, the only function of the pair of characters "00" is to make the reply comply with the standard of this command, which is generic for all ELPRO matrixes. <CR> 1 end of string character(Hex 0D) -
Page 22: Gobal Status Request
"3" : 2 seconds <CR> 1 end of string character(Hex 0D) Example: The host sends on line the following hexadecimal characters: 64 0D ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 23: Seamless Times Request
A matrix that has a seamless switching time of 500 msec set on the first 4 outputs and a time of 1 second on the other outputs will reply with: 77 31 31 31 31 32 32 32 32 0D ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 24: Matrix Identifier Request
Example: The host sends on line the following hexadecimal characters: 69 0D The matrix will reply with the following hexadecimal characters: 69 65 30 0D ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 25: Firmware Upgrade
This is very useful as, when capabilities are added to the appliances, customers who purchased the product earlier can also benefit from these. The firmware of the TZM883V can also be updated via RS232 using the UPLOADER program. This program must be downloaded from the site www.elprovideolabs.com and installed on a PC under Windows ©. -
Page 26: Technical Data
Weight 3 Kg Operating temp. range 0 to 45 °C Safety according to EN 60065 according to EN 55103-1 and EN 55103-2 Mark ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751... -
Page 27: Notes
During the warranty period, Elpro will repair the faulty units free of charge. The faulty units must be sent CARRIAGE FREE to the Elpro offices in Turin with a regular accompanying note.