Power Supply - ELPRO DVIPRO1000 Manual

DVIPRO1000

2.0 POWER SUPPLY

The DVIPRO1000 unit must be powered at 90÷240 Vac 50/60Hz using the
cable provided. The socket of the cable must be inserted in the related panel
plug to the left on the back of the unit.
The panel plug is equipped with a fuse holder for 5X20 fuses. If the fuse
blows, replace it with one of the same rating as specified on the back of the
unit.
All operations must be carried out by qualified personnel who
In some countries, the plug of the cable must be adapted to local standards.
The wires are identified according to the following coding:
- Brown
- Blue
- Yellow/Green GROUND (Identified with the letter E, may be green)
ELPRO Video Labs s.r.l.
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
8x2 UNIVERSAL SCALER MATRIX SWITCHER
& EFFECT CONTROL
must be informed of the risk of electric shock
PHASE (Identified with the letter L, may be red)
NEUTRAL (Identified with the letter N, may be black)
A ground connection is compulsory
WARNING
5
5