Table of Contents
Advertisement
DVIPRO1000
7.0 PROGRAMMING MENU
The DVIPRO1000 can carry out a set of adjustments and settings accessible
via a programming menu.
The adjustments and settings are independent for each output.
The menu is accessed pressing the "MENU" key referring to the output
channel concerned.
The programming menus are described below, recalling the general rules of
"navigation" inside these:
- the UP and DOWN ARROWS scroll the various items of each single
page of the menu
- the RIGHT ARROW enters the sub-page selected
- the ENTER key accesses the sub-page selected
- the LEFT ARROW moves to the higher level
- the LEFT and RIGHT ARROWS regulate the parameter selected
- the MENU key moves to the higher level
- the ENTER key confirms selection
After around 20 seconds of inactivity, the OSD menu is cleared automatically.
ELPRO Video Labs s.r.l.
24
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
8x2 UNIVERSAL SCALER MATRIX SWITCHER
& EFFECT CONTROL
WARNING
24
2
Advertisement
Table of Contents
