Table of Contents
Advertisement
DVIPRO1000
Example 1 : input 1 is on the MAIN. To activate input 3 in PIP, I press key "1"
and then and at the same time key "3".
Example 2 : on the MAIN I have input 1 and input 3 on the PIP.
To switch the PIP input on 4, I press key "1" and then at the same time key
"4".
1) Input 7 cannot be activated in the PIP window when this is
programmed as DVI format
2) An input programmed as VGA cannot be activated in PIP if an input
programmed as VGA is already present in the MAIN.
3) It is not possible to enable the PIP window when operating in MIXER
or CUT mode.
ELPRO Video Labs s.r.l.
12
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
8x2 UNIVERSAL SCALER MATRIX SWITCHER
& EFFECT CONTROL
In both cases, the DVIPRO1000 will display the
"NOT ALLOWED" message
In this case, the DVIPRO1000 will display the
"ALREADY IN MIXER" message
WARNING
12
1
Advertisement
Table of Contents
