Table of Contents
Advertisement
DVIPRO1000
8.0 RS232 SERIAL AND ETHERNET COMMANDS
All the programming operations described above can be carried out using the
remote control or via a remote serial channel: this may be a standard RS232
serial line or an Ethernet LAN that the PC will see as a virtual serial port,
programmable using a specific DSManager software driver that can be
downloaded free from the site www.elprovideolabs.com.
The entire set of commands for driving the DVIPRO1000 and for status
acquisition
management software for remote driving of the DVIPRO1000.
The serial line is of the three-wire type (TX RX GND) with Baud rate of 9600
baud, no parity and no control of hardware or software flow.
The command strings to be sent to the machine and the expected replies are
shown in the tables below. The strings consist of ASCII characters and are
terminated with the [CR] character.
ELPRO Video Labs s.r.l.
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
8x2 UNIVERSAL SCALER MATRIX SWITCHER
& EFFECT CONTROL
are
described
below.
Elpro
makes
available
complete
31
31
Advertisement
Table of Contents
