Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ELPRO Manuals
  4. Matrix Switcher
  5. HS10M
  6. Manual

ELPRO HS10M Manual

10 x 10 hdmi matrix switcher
Hide thumbs

Advertisement

Quick Links

Download this manual
ITEM NO.: HS10M 10 x 10 HDMI Matrix Switcher
HS10M is a 10x10 HDMI Matrix Switch that allows you to route 10 HD sources to 10 HD displays. The
10x10 HDMI Matrix switch is a complete HD routing solution for whole home HDTV systems. It provides
3D support, UltraHD 4K2K, and with 2U Rack mountable for professional installations. In addition, the
can be controlled through GUI Ethernet, Android/IOS App Control, IR remote control,
HS10M
RS-232 and by the front panel keyboard.
Features:
Connect up to 10 HDMI source to 10 x HDMI display monitors.
HDMI 1.4 with 3D, HDCP and DVI Compliant.
High definition video up to 4K2K 24/25/30Hz 8bits, 1080p 60Hz 12bits.
Easy to use front panel control or IR remote control.
Built in Web server (GUI) and
Built in RS232 console port to select input/output and other parameters
Input/Output status could be displayed at front panel LCM and LED strings.
HDMI Matrix Switcher Series
Android/iOS App Control.
Rev. B May 18th 2015
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the HS10M and is the answer not in the manual?

Questions and answers

Related Manuals for ELPRO HS10M

Summary of Contents for ELPRO HS10M

  • Page 1 ITEM NO.: HS10M 10 x 10 HDMI Matrix Switcher HS10M is a 10x10 HDMI Matrix Switch that allows you to route 10 HD sources to 10 HD displays. The 10x10 HDMI Matrix switch is a complete HD routing solution for whole home HDTV systems. It provides 3D support, UltraHD 4K2K, and with 2U Rack mountable for professional installations.
  • Page 2 1.0 HS10M Panel View: 2.0 HS10M Connection View: ETHERNET IR01 RJ45 IR Receiver MATRIX …………….. …………….. CONSOLE HDMI 1 HDMI 10 HDMI 1 HDMI 10 RS-232 INPUT OUTPUT …………… …………… SOURCE SOURCE...
  • Page 3 3.0 Keypad, LEDs and LCM 3.1 Back Panel Switch: POWER Light on Power on Light off Power off 3.2 Front LED Indication: BLUE Power on Standby LED off Power Off INPUT 1~10 BLUE Signal indication LED off No signal OUTPUT 1~10 BLUE HDMI output indications LED off...
  • Page 4 3.4 Mode of operation of the Front Panel: OUTPUT 1÷10 and INPUT 1÷10 Press OUTPUT 1÷ 10 to select output port. Then the relative input at IN line of LCM will blink. Press INPUT 1÷10 to select input port to be routed on the output previously selected. ALL : Press ALL button, the IN line of LCM will blink, press INPUT 1÷10 to select the input port to be routed on all output port.
  • Page 5 3.5 LCM Panel Function: Power on Main Screen When the power is on and the main screen appears 10X10 HDMI MATRIX Channel Setting on Main Screen The Matrix will jump to channel setting screen after 10 seconds, press the MENU key to enter the main 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10...
  • Page 6 4.0 LCM Main MENU Function Operations: 4.1 SWITCH：(Default: 1 2 3 4 5 6 7 8 9 10) This function is used to switch the input/output port. Enter the SWITCH menu. Press the ENTER key, then the LCM second line INPUT will flash. Press LEFT or RIGHT button to select the output to be modified.

  • Page 7: Subnet Mask

    4.3 Ethernet * IP Address Subnet Mask Gateway DHCP Client Media Type MAC Filter IP Address: (Default: 192.168.0.10) IP Address 192.168. 0.10 This function setup MATRIX host intranet ”IP Address”. Press ENTER and the left-most number of second row will flash. Press the UP or DOWN buttons to change the numbers. Press RIGHT to move to the adjacent location and so on till the fourth group on numbers.
  • Page 8 DHCP Client: (Default Disable) DHCP Client Disable When DHCP Clients is setup at “Enable”, the MATRIX will automatically get IP Address, Subnet Mask and Gateway. If it’s setup at “Disable”, the IP Address, Subnet Mask and Gateway must be setted manually as described above.

  • Page 9: Copy Mode

    5.1 channel. After enter BUILD-IN MODE menu, press UP or DOWN key to select 1080P LPCM-2CH or 1080P LPCM-5.1CH, then press ENTER to confirm setting. 1080P LPCM-2CH 1080P LPCM-5.1CH HS10M HDMI – 1 Player - 1 EDID HDMI –...
  • Page 10 Warning: If the user wants to exploit the 4K2K capability of the matrix, it’s necessary to copy the EDID of the 4K2K destination. For this operation, the destination 4K2K must be connected to one of the 10 outputs and must be switched on. Then the routine COPY MODE described above must be performed.
  • Page 11 5.0 Remote Control Function (IR01): 5.1 To command the matrix locally, setup the remote control IR01 ID with the same code of the Matrix (see 4.5). The default code is 4. (Power+4) 5.2 Warning: These settings have to be done the first time you use the IR01 or when you change the batteries.
  • Page 12 Quick key6 Quick key7 Quick key8 Quick key9 Quick key10 (same as Matrix) EDID (same as Matrix) For example: to connect output port 1 to input port 4, press the quick key 1 (OUTPUT 1) and then press the quick key 4 (INPUT 4). Warning: When the matrix is in stand-by mode, the IR Remote Control, can only power-on the matrix.
  • Page 13 6.0 REMOTE Control Function： HS10M supports RS232 and TCP/IP with the protocol as it follows: 6.1 For RS232 CONSOLE: Connect the RS232 Sub-D 15 pin f. CONSOLE port to the COM port of the host by a Sub-D 15 pin F/M RS232 straight cable (pin 2 to pin 2; pin 3 to pin 3, pin 5 to pin 5) Communication format is 9600, 8, N, 1 (9600 bps, 8 data bits, no parity check, 1 stop bit) 6.2 For Ethernet TCP/IP (Winsock)
  • Page 14 GATEWAY△[x.x.x.x] Set Matrix gateway MEDIA_TYPE△[z] Network speed select MAC_FILTER△[y] Mac filter on/off STATUS Show connection status VERSION Show firmware version HELP Help [Symbol] [Parameter] ------------------------- ------------------------------------------- 01~10, ff =ALL 00 =off, 01~10 =1~10 00~09=0~9 0~255 00 =off, 01 =on 00 =auto, 01 =10M, 02 =100M Example: (△correspond to “space”) -To route input 4 to output 1, send the following string: TX01...

  • Page 15: Initial Ip Configuration

    7. Web Control Function: Initial IP Configuration 1. Setup the MATRIX IP Address as your PC domains.(Default 192.168.0.10). Follow the indications at chapter 4.3 2. Type the IP Address on the URL of your browser to link to the Web UI of the MATRIX host. 3.
  • Page 16 Advanced:  IP address : Change IP address Subnet mask : Change Subnet mask   Gateway IP : Change Gateway IP  Media Type : Change detect 10 / 100 / Auto  DHCP Client : When setup at Enable, the MATRIX host will automatic IP Address、Subnet Mask、Gateway.
  • Page 17 Aliases:  Aliases page can change input/output name. Enter Apply to finish the setting after change The new name will updated on the SWITCH SETTING page Output / Input.  Click on Back to jump to Advanced page. MAC Filter: ...

  • Page 18: Specification

     Load : Reload one out of 10 set of channel settings  Back : Jump to Advanced page. Specification: ITEM NO HS10M HDMI Resolution 4096x2160p 24/25/30Hz 8bit RGB444, 1080p 60Hz 12bit, 3D Video Input Interface HDMI Type A x 10...
  • Page 19 System Setting Connect mobile phone to Wi-Fi and set the IP/ subnet mask same of the matrix network segment Default IP address of 10x10 matrix HS10M-2 is 192.168.0.10 Default IP address of 4x4 matrix HS04M-2 is 192.168.0.200 Default subnet mask is 255.255.0.0...
  • Page 20 Main Page: When first time enter the APP will see the main page Bottom left「+」to add matrix Bottom right「Info」to show information Scan Device Touch「+」button at main screen to enter「Scan Device」page Touch bottom left「Scan Device」to start scan Touch bottom right pen icon to input the IP address manually Add Matrix After scanning it will show all matrixes in the list Touch the IP in list to enter「Add Device」page...
  • Page 21 Enter the name of matrix then touch「Add Device」to finish setting Notice螺Name should be unique, not allow duplicate It will show「+」icon in front of the IP address when finished Return to main screen you will see the matrix which just add...
  • Page 22 Modify Device Press the matrix name to show pop-up dialog Touch「Modification」to enter modification page. Yellow block shows matrix name and icon Green block shows name and icon of output devices Brown block shows name and icon of input devices...
  • Page 23 Touch yellow block to modify matrix name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the matrix have been changed Touch green block to modify output name and icon Input the name and select the icon you prefer then touch「Save」to finish...
  • Page 24 Return to Modification page you will see the output have been changed Touch brown block to modify input name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the input have been changed...
  • Page 25 Output Channel Switching Left : icon for matrix Center upper big font for matrix name, Center middle small font for matrix IP Center lower small font for matrix type (4 by 4 or 10 by 10) Notice: if shows「Specify the host does not exist」means the matrix not exist Touch the block of matrix to enter Controler page Top right 「Refresh」to renew the status of matrix...
  • Page 26 Touch input device to switch or ON/OFF icon to power on/off It will return to Controller page after switching and refresh the status of channel...
  • Page 27 Save Scene In Controller page touch bottom left「Save Scene」to enter Save Scene page Touch the Scene column to show pop-up dialog Touch 「Save」to save current channels setting for all output It will return to Save Scene page automatically. Notice: if it showsˉ Please update device firmwareˉ means your matrix do not support this function, please upgrade your firmware to enable this function...
  • Page 28 Load Scene In Controller page touch bottom right「Load Scene」to enter Load Scene page Touch scene column to load saved channels setting for all output It will return to Load Scene page automatically. (Default is Output 1 to Input 1, Output 2 to Input 2 and so on…) Notice: if it showsˉ...
  • Page 29 Delete Matrix Press the block of matrix in Controller page to show pop-up dialog then touch「Delete」 Touch「Delete」to delete the matrix...
  • Page 30 System Setting Connect mobile phone to Wi-Fi and set the IP/ subnet mask same with matrix network segment Default IP address of 10x10 matrix HS10M-2 is 192.168.0.10 Default IP address of 4x4 matrix HS04M-2 is 192.168.0.200 Default subnet mask is 255.255.0.0...
  • Page 31 Main Page When first time enter the APP will see the main page Top left「+」to add matrix Top right 「Edit」to enter delete mode Bottom right「Info」to show information Scan Matrix Touch「+」button at main screen to enter「Scan Device」page Touch bottom left「Scan Device」to start scan Touch bottom right pen icon to input the IP address manually Add Matrix After scanning it will show all matrixes in the list...
  • Page 32 Enter the name of matrix then touch「Add Device」to finish setting Notice螺Name should be unique, not allow duplicate It will show「+」icon in front of the IP address when finished Return to main screen you will see the matrix which just add...
  • Page 33 Modify Device Touch the gear icon to enter Modification page Yellow block shows matrix name and icon Green block shows name and icon of output devices Brown block shows name and icon of input devices Touch yellow block to modify matrix name and icon Input the name and select the icon you prefer then touch「Save」to finish...
  • Page 34 Return to Modification page you will see the matrix have been changed Touch green block to modify output name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the output have been changed...
  • Page 35 Touch brown block to modify input name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the input have been changed...
  • Page 36 Output Channel Switching Left: icon for matrix Center upper big font for matrix name, Center middle small font for matrix IP Center lower small font for matrix type (4 by 4 or 10 by 10) Right gear icon: enter Modification page Notice: if shows「Specify the host does not exist」means the matrix not exist Touch the block of matrix to enter Controller page...
  • Page 37 Touch input device to switch or ON/OFF icon to power on/off It will return to Controller page after switching and refresh the status of channel...
  • Page 38 Save Scene In Controller page touch bottom left 「Save Scene」 to enter Save Scene page Touch the Scene column to show pop-up dialog Touch 「Save」to save current channels setting for all output It will return to Save Scene page automatically. Notice: if it shows ˜...
  • Page 39 Load Scene In Controller page touch bottom right「Load Scene」to enter Load Scene page Touch scene column to load saved channels setting for all output It will return to Load Scene page automatically. (Default is Output 1 to Input 1, Output 2 to Input 2 and so on…) Notice: if it showsˉ...
  • Page 40 Delete Matrix Touch top right「Edit」button to enter delete mode Touch 「-」button in the left of matrix Touch「Delete」to delete the matrix Touch top right 「Done」to exit...