Page 1
• • • • Audio associated with video with volume adjustment • • • • IR, RS232 and Ethernet control DVIPRO1000 M 28/05/08 ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Technical data 11.0 Notes Please read this handbook carefully when installing the DVIPRO1000 unit. The manufacture shall not be held responsible for any damages caused by use, even correct, of its products. Product data and characteristics may be modified without prior notice.
Thank you for buying this product. Check the contents of the packaging carefully. It contains: The DVIPRO1000 unit permits switching, on two independent, programmable outputs, of video and audio signals from eight different sources. In particular, for the video part: - IN1 and IN2: 2 inputs on connector VGA HDD15p.
Page 4
An Overlay function is also available which permits subtitling or overlay effects between images. The DVIPRO1000 features 8 different global preset memories that can be saved and recalled by the user. The basic commands for control of the machine are available from the...
& EFFECT CONTROL 2.0 POWER SUPPLY The DVIPRO1000 unit must be powered at 90÷240 Vac 50/60Hz using the cable provided. The socket of the cable must be inserted in the related panel plug to the left on the back of the unit.
Page 6
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL EXAMPLE OF CONNECTION ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
HDMI signal, it is not necessary to connect a separate audio signal on IN8 as the DVIPRO1000 is able to decode the audio present in the HDMI signal and convert this into a traditional analogue signal on the selected output.
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL 4.0 BASIC FUNCTIONS Power on the DVIPRO1000 using the switch on the rear panel. The unit will perform StartUp phase lasting around seconds, (during this phase the whole keyboard blinks red/green) at the end of which it will switch to the Default condition.
Page 9
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL The main commands for functioning of the DVIPRO1000 can be carried out from the local keyboard. Machine keyboard 4.0.1 lighting keys In order to give a better and quicker intellegibility of the system , each key has An internal red/green/yellow light , with the following scheme;...
Page 10
N.B. the VGA analogue output and the DVI digital output of the single output channel always have the same resolution. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 11
With regard to input 8, if this is used in HDMI format, the related digital audio stream inserted in the HDMI signal will be automatically decoded by the DVIPRO1000. If the audio is to be provided separately in analogue format on input 8 audio, input 8 must be programmed as DVI format.
Page 12
2) An input programmed as VGA cannot be activated in PIP if an input programmed as VGA is already present in the MAIN. In both cases, the DVIPRO1000 will display the “NOT ALLOWED” message 3) It is not possible to enable the PIP window when operating in MIXER or CUT mode.
Page 13
StartUp cycle of around 20 seconds. The DVIPRO1000 maintains, as default memory, the last state that was active at the time of power-off.
Page 14
(from 1 to 6 for FADE and MIX) OVERLAY - enable of Overlay and type of OVERLAY set (from 1 to 5 or OFF) ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
“Set” key for a few seconds followed by the key with the white border (Enter key) ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 16
AUDIO VOLUME FOR THE INPUT 6.1.6 VOL2 +/- ADJUSTMENT SELECTED ON OUT2 OUT 2 STATUS OF THE ON BOTH 6.1.11 ENTER KEY SYSTEM CHANNELS ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 17
ON BOTH 6.1.9 RECALL CHANNELS SAVE A PRESET ON BOTH 6.1.9 SAVE CHANNELS RESTORE MACHINE ON BOTH 6.1.10 DEFAULT TO INITIAL CHANNELS CONFIGURATION ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
The “MAIN over PIP” setting makes it possible to reverse PIP/MAIN display; this is useful for also displaying input 7 in PIP when this is programmed as DVI, a function that the DVIPRO1000 would not permit (see paragraph 4.4). However, it should be noted that channel switching in this condition generates an incorrect fade sequence: however, switching is performed normally.
Page 19
6.1.2) and to press the “FREEZE” key. 6.1.4 Switching effects (Fading, Mixer, Cut) The DVIPRO1000 performs “seamless switching” between the channels in three different ways: Fading, Mixer, Cut. To select the switching method, continue to press the “EFFECT” button of the output to be worked on: the mode selected will be shown on the LCD display and video.
Page 20
ALREADY IN MIXER 6.1.5 Overlay effects (Overlay or titling) The DVIPRO1000 can also be used in image overlay mode with masks of different color that can be defined by the user to obtain various Overlay or Titling effects: for example “keyhole”...
Page 21
Holding down the key, volume is increased/reduced quickly. The adjustment will be saved permanently and each input will have its associated volume in output. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 22
6.1.8 Locking of the local keyboard To block access to machine functions, press the “LOCK” key: all keyboard functions will be inhibited until the key is pressed again. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 23
& EFFECT CONTROL 6.1.9 Saving and recall of configurations The DVIPRO1000 has an internal memory in which 8 different global machine presets can be saved and recalled at any time. To save a machine state, press the “SAVE” key: a menu will be displayed from to select the memory position to be used amongst the 8 available.
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL 7.0 PROGRAMMING MENU The DVIPRO1000 can carry out a set of adjustments and settings accessible via a programming menu. WARNING The adjustments and settings are independent for each output. The menu is accessed pressing the “MENU” key referring to the output channel concerned.
Page 25
“ENTER”. The “Default Scheme” item returns all the image parameters to the predefined default value. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 26
The “Default Scheme” item of the previous menu returns all the image parameters to the predefined default value. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 27
:Correction of blue dominants -Main MADI Mode :De-interlacing mode -DCDi :Correction of artifacts of “almost horizontal” lines (Faroudja system) -CCS Mode :Elimination of “cross color” effect ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 28
The “RESIZE FULL” item restores the windows to “PIP over MAIN 1” mode with full-screen MAIN and PIP in the window to the bottom right. ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 29
7.5 OVERLAY. Overlay Menu This menu can be used to set certain parameters for Overlay functioning in “User Mode”: the other 4 modes are predefined on the DVIPRO1000 and cannot be modified (see par 6.1.5). The modifiable parameters are the transparency intervention thresholds of the three basic colors (RGB) and the type of overlay mask.
Page 30
& EFFECT CONTROL Example 2: - to obtain a “keyhole” type function, use a PIP image with a black background and set the DVIPRO1000 as (BELOW / AND) For precise functioning, it is advisable to use images with a clearly defined outline for the PIP (preferably source from PC), in order to avoid areas of uncertainty in the color change zones.
Page 31
Ethernet LAN that the PC will see as a virtual serial port, programmable using a specific DSManager software driver that can be downloaded free from the site www.elprovideolabs.com. The entire set of commands for driving the DVIPRO1000 and for status acquisition described below.
Page 32
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 33
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 34
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 35
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 36
1 is the selection of the main window 7 is the selection of the input on which to switch The DVIPRO1000 replies: ACK (06 hex) if the command has been recognized correctly NACK (15 hex) if transmission errors have occurred...
Page 37
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL The DVIPRO1000 replies: ACK (06 hex) if the command has been recognized correctly NACK (15 hex) if transmission errors have occurred BEL (07 hex) when the command has been performed completely Es4: Setting of the main window of output channel 2 to size 400x300 with origin in 100,100.
Page 38
“R” is the selection of the Recall function 6 is the selection of the preset to be recalled The DVIPRO1000 replies: ACK (06 hex) if the command has been recognized correctly NACK (15 hex) if transmission errors have occurred...
Page 39
DVIPRO1000 8x2 UNIVERSAL SCALER MATRIX SWITCHER & EFFECT CONTROL The DVIPRO1000 replies: 0 1 0 0 . 0 1 0 0 . 0 4 0 0 . 0 3 0 0 . CR which in hexadecimal corresponds to: 30 31 30 30 2E 30 31 30 30 2E 30 34 30 30 2E 30 33 30 30 2E 0D...
Page 40
It is necessary to configure a DVIPRO1000 unit in the console CNS1000 through the “NEW UNIT” parameters (see CNS1000 Manual). The 8 console inputs correspond to the 8 DVIPRO1000 inputs whereas the 4 outputs correspond to: OUT1 = OUT1 Main Window...
1, 2, 7, 8 input keys of the output 2. Connect the PC through the serial line. Use the Elpro Upgrade software, available at the Elpro site . LCD will show the Upgrade state, and when it is finished, you have to turn Off the unit in order to activate the upgrading.
Pan of both images in X and Y Functions: Preview, Overlay, Titling, Image & color adjustment, DNR, Motion control, VGA Autoadj., Clock & Phase control, ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
Page 43
Weight: 4,5 Kg Operating temp. range: 0 ÷45 ° C Safety: according to EN 60065 EMC: according to EN 55103-1 and -2 CE Mark ELPRO Video Labs s.r.l. St.da della Pronda, 45/B 10142 Torino ITALY Tel.+39 0117701583 – Fax +39 011703751...
During the warranty period, Elpro will repair the faulty units free of charge. The faulty units must be sent CARRIAGE FREE to the Elpro offices in Turin with a regular accompanying note.