Replacing The Headlight Bulb - Yamaha WR250R Owner's Manual

Specified fuses:
Main fuse:
30.0 A
Ignition fuse:
7.5 A
Signaling system fuse:
10.0 A
Headlight fuse:
15.0 A
Radiator fan motor fuse:
7.5 A
Backup fuse:
7.5 A
Fuel injection system fuse:
7.5 A
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If a fuse immediately blows again,
have a Yamaha dealer check the
electrical system.
Periodic maintenance and adjustment

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
1. Do not touch the glass part of the bulb.
1. Remove the headlight cowling to-
6-35
EAU45217 gether with the headlight unit by
removing the bolts and pulling up-
ward as shown.
1
ECA10661
1. Bolt
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight coupler
2. Headlight bulb cover
1
2
1
3
4
5
6
7
8
1
9
2 10
11
12