Yamaha WR250R Owner's Manual page 30

Instrument and control functions
1
(a)
(b)
2
1
3
4
5
1. Rebound damping force adjusting screw
Rebound damping setting:
6
Minimum (soft):
17 click(s) in direction (b)*
Standard:
7
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
8
* With the adjusting screw fully turned
in direction (a)
9
Compression damping force
1. Remove the rubber cap by pulling
10
it out of the front fork leg.
11
12
1
1. Rubber cap
2. To increase the compression
damping force and thereby harden
the compression damping, turn the
adjusting screw on each fork leg in
direction (a). To decrease the
compression damping force and
thereby soften the compression
damping, turn the adjusting screw
on each fork leg in direction (b).
3-15
(b)
(a)
1
1. Compression damping force adjusting
screw
Compression damping setting:
Minimum (soft):
19 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
3. Install the rubber cap.
TIP
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks