For Your Safety - Pre-Operation Checks - Yamaha WR250R Owner's Manual

Hide thumbs Also See for WR250R:
Table of Contents

Advertisement

For your safety – pre-operation checks
1
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
2
and maintenance procedures and schedules described in the Owner's Manual.
WARNING
3
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in
4
this manual, have the vehicle inspected by a Yamaha dealer.
Before using this vehicle, check the following points:
5
ITEM
6
Fuel
7
Engine oil
8
Coolant
9
10
Front brake
11
12
• Check fuel level in fuel tank.
• Refuel if necessary.
• Check fuel line for leakage.
• Check oil level in engine.
• If necessary, add recommended oil to specified level.
• Check vehicle for oil leakage.
• Check coolant level in reservoir.
• If necessary, add recommended coolant to specified level.
• Check cooling system for leakage.
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check lever free play.
• Adjust if necessary.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
CHECKS
4-1
EAU15599
EWA11152
PAGE
3-11
6-12
6-14
6-23, 6-25, 6-26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents