Yamaha WR250R Owner's Manual page 20

Instrument and control functions
1
2
3
4
1
5
1. Tripmeter A indicator "
6
7
8
1
9
1. Tripmeter B indicator "
10
TIP
Indicator " " comes on when tripmeter
11
A is selected, and indicator " " comes
on when tripmeter B is selected.
12
If the fuel level warning light comes on
(see page 3-2), the display will auto-
matically change to the fuel reserve
tripmeter mode "F" and start counting
the distance traveled from that point. In
this case, push the "SELECT 2" button
to switch the display between the vari-
ous tripmeter and odometer modes in
the following order:
fuel reserve tripmeter "F"  odometer
 tripmeter A  tripmeter B  fuel re-
"
serve tripmeter "F"
TIP
The fuel level warning light may not
function accurately while riding off road
as the fuel level reading changes due to
the movement and inclination of the ve-
hicle.
If the fuel level warning light comes on
while riding in the measurement mode,
change to the basic mode and push the
"
"SELECT 2" button to display the fuel
reserve tripmeter.
TIP
To change from the measurement
mode to the basic mode, the stopwatch
and the distance-compensation tripme-
ter must be stopped.
1. Fuel reserve tripmeter "F"
To reset a tripmeter, select it by push-
ing the "SELECT 2" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter "F" manually, it will re-
set itself automatically and the display
will return to the prior mode after refuel-
ing and traveling 5 km (3 mi).
TIP
The display cannot be switched back to
fuel reserve tripmeter "F" after the fuel
reserve tripmeter "F" has been reset.
Clock
The clock uses a 12-hour time system.
3-5
1