Handlebar Switches - Yamaha WR250R Owner's Manual

Resetting the distance-compensa-
tion tripmeter or the distance-com-
pensation tripmeter in combination
with the stopwatch
TIP
Resetting can be made only to the dis-
tance-compensation tripmeter or to the
distance-compensation tripmeter
combination with the stopwatch.
Resetting the distance-compensation
tripmeter
1. Check that the stopwatch mea-
surement is in operation.
2. Reset the distance-compensation
tripmeter to zero by pushing the
"RESET" button for at least two
seconds.
Resetting the distance-compensation
tripmeter in combination with the stop-
watch
1. Stop the stopwatch.
2. Reset the distance-compensation
tripmeter and the stopwatch to
zero by pushing the "RESET" but-
ton for at least two seconds.
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on and the display will indi-
cate an error code.
in
If the display indicates any error codes,
note the code number, and then have a
Yamaha dealer check the vehicle.
1
1. Error code display
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
3-8
Instrument and control functions

Handlebar switches

Left
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
Right
ECA11591
1. Engine stop switch "
2. Start switch "
EAU1234H
1
2
1
3
4
2
5
3
6
/ "
/ "
7
"
8
1
9
10
2
11
12
/ "
"