Sidestand - Yamaha TENERE XT660ZA Owner's Manual

Hide thumbs Also See for TENERE XT660ZA:
Table of Contents

Advertisement

WARNING
This shock absorber assembly
contains highly pressurized nitro-
gen gas. Read and understand the
following information before hand-
ling the shock absorber assembly.
G
Do not tamper with or attempt
to open the cylinder assembly.
G
Do not subject the shock
absorber assembly to an open
flame or other high heat sour-
ce. This may cause the unit to
explode due to excessive gas
pressure.
G
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
G
Do not dispose of a damaged
or worn-out shock absorber
assembly yourself. Take the
shock absorber assembly to a
Yamaha dealer for any service.
INSTRUMENT AND CONTROL FUNCTIONS
EWA10221

Sidestand

1. Sidestand
The sidestand is located on the left
side of the frame. Raise the sidestand
or lower it with your foot while holding
the vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system,
which cuts the ignition in certain
situations. (See page 3-20 for an
explanation of the ignition circuit cut-
off system.)
EAU15303
The vehicle must not be ridden with
the sidestand down, or if the sides-
tand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control. Yama-
ha's ignition circuit cut-off system
has been designed to assist the
operator in fulfilling the responsibi-
lity of raising the sidestand before
starting off. Therefore, check this
system regularly as described
below and have a Yamaha dealer
repair it if it does not function pro-
perly.
3-19
WARNING
EWA10240
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tenere xt660z

Table of Contents