Door catch
The Push2Open door catch on your
wine conditioning unit makes it easy to
open the door. The appliance door is
sensitive to pressure.
The Push2open system is deactivated
ex-works. It has to be activated after
installing the appliance in its niche.
This is done by pressing the On/Off
switch.
To open the door
Press briefly against the appliance
door and then release it. The appli-
ance door opens automatically by a
gap.
Then pull the door fully open.
To protect against inadvertent open-
ing: if you do not open the door wider,
it will close again by itself after approx.
3 seconds.
To close the door
Push the door shut.
Danger of damage!
To avoid damage to the door catch:
do not obstruct the door whilst it is
opening.
Do not push in or hold onto the door
catch whilst the door is closing.
Guide to the appliance
Please be aware that using magnets in
front of the wine conditioning unit door
can cause it to open by mistake. This
is caused by the door closing mech-
anism on the wine conditioning unit.
17