Yamaha SXV70SJ Supplementary Service Manual page 94

Clamp the side frame reinforce-
13
ment with the harness wire,
starter relay lead, gear position
switch lead and main harness.
Pass the coupler under the fuel
14
and oil reserve hose and the
coupler has to be hidden in the
inner panel.
Route the main switch lead be-
15
hind the instrument panel at-
taching screw.
Pass the parking brake cable un-
16
der the oil tank breather hose.
Route the main switch lead after
17
routing it backward once.
Pass the main harness over the
18
oil tank breather hose.
Brake hose
19
Wire harness
20
Starter cable
21
Oil level switch
22
Speed sensor
23
Coolant hose
24
Fold back the clamp and secure
25
it.
Drive V-belt guard bracket.
26
Secure the head light lead at the
27
protection tube area with the
clamp.
Gear position switch lead
28
Y.P.V.S. check coupler, or sub
29
lead coupler for model with start-
er motor
Route the wire harness so that it
30
will not get contact with the recti-
fier / regulator.
Rectifier/ regulator
31
CABLE ROUTING
–88–
SPEC