Advertisement
2.4
Using an Ethernet Cable (RJ45),
connect your PC's "ETHERNET"
port to any of the available
Residential Gateway's "LOCAL
ETHERNET" ports.
2.5
Verify that the "ETHERNET" and
"BROADBAND" LEDs found in
front of the Residential Gateway
are light up in GREEN.
Note:
If the LEDs mentioned in 2.5 are not light
up, please check your connections again
based on 2.1 to 2.4. You may now proceed
to Step 3 once the LEDs are light up.
2.6
Optional: If you have subscribed
to mio TV service, please connect
the Set-Top-Box to the Residential
Gateway using the blue ethernet
cable (RJ45) provided.
3
Hide quick links:
Advertisement
