Operation; Powering On/Off The Product; Powering On The Nas - Seagate SRPS20 User Manual

Opera on
Powering on/off the product
Caution: Do not operate the product until the ambient temperature is within the specified

operating range (see
acclimatized before operating them.

Powering on the NAS

1. Confirm that the NAS is connected to an active power source.
2. Make certain that all hard drive trays are securely attached to the enclosure.
3. Apply a short push to the product's power button. See the note below regarding a short push and a long
push.
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay
System Overview). Confirm that newly installed hard drives are
4/13/15 47