Alliance Laundry Systems D1627ENR5 Installation Operation & Maintenance
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. D1627ENR5
  6. Installation operation & maintenance
Alliance Laundry Systems D1627ENR5 Installation Operation & Maintenance

Alliance Laundry Systems D1627ENR5 Installation Operation & Maintenance

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Washer-Extractors
Cabinet Freestanding
Refer to Page 9 for Model Identification
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. D1627ENR5
www.alliancelaundry.com
March 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D1627ENR5 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems D1627ENR5

Summary of Contents for Alliance Laundry Systems D1627ENR5

  • Page 1 Washer-Extractors Cabinet Freestanding Refer to Page 9 for Model Identification Original Instructions Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. D1627ENR5 www.alliancelaundry.com March 2016...

  • Page 3: Table Of Contents

    Input Voltage Requirements................59 © Copyright 2016, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 4 Earth Leakage Trips..................81 Unblocking the Door Lock In Case of Emergency..........82 Care of Stainless Steel................... 84 Disposal of Unit..................85 Disconnecting the Machine................85 Disposal of Unit....................85 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 5: Safety Information

    Be aware that hazardous chemicals may be present. Wear hand and eye protection when adding detergents and W023 chemicals. Always read and follow manufacturer’s instruc- © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 6 W820 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 7: Safety Decals

    3. Do not attempt to operate the machine if any of the following conditions are present: a. The door does not remain securely locked during the en- tire cycle. b. Excessively high water level is evident. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 8 Do not bypass any safety devices in the machine. WARNING Operating the machine with severe out-of-balance loads could result in personal injury and serious equipment damage. W728 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 9: Introduction

    LH1000_X_CONTROL_PLUS UY275_MICRO HYU520F LH1250_X_CONTROL_PLUS UY275_PROFORM IX180_MICRO LH335_X_CONTROL_PLUS UY335_PROFORM IX230_MICRO LH400_X_CONTROL_PLUS UY400_PROFORM IX275_MICRO LH550_X_CONTROL_PLUS UY520_PROFORM IXR180W LH800_X_CONTROL_PLUS UY800_PROFORM IXR230W MWFS100 UY90_MICRO IXR275W MWFS80 UY90_PROFORM Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 10: Delivery Inspection

    Alliance Laun- dry Systems at +1 (920) 748-3950 for the name and address of the nearest authorized parts distributor. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 11: Specifications And Dimensions

    1760 x 2350] 1760 x 2350] 2150 x 2325] 2350 x 2425] 2350 x 2425] ing(WxDxH), in. [mm] Wash Cylinder Information Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 12 Wash, RPM Extraction, Heating Hot water, °F 90 [194] 90 [194] 90 [194] 90 [194] 90 [194] 90 [194] [°C] Noise Emissions Wash sequence, Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 13 Relative Hu- 30%-90% without condensation midity Height above up to 3280 [up to 1000] sea level ft. [m] Storage Tem- 34-131 [1-55] perature, °F [°C] © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 14: Machine Dimensions

    17. Compressed air inlet (if equipped) 18. Soap dispenser 19. Electrical signals liquid soap 20. USB port (on request) 21. PC programming connection Figure 1 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 15 10.83 [275] 6.89 [175] 6.89 [175] 6.89 [175] 27.56 [700] 27.56 [700] 27.56 [700] AA* ** 53.58 [1361] 53.58 [1361] 53.58 [1361] Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 16 * The dimensions of the machine with weighing system (on request; models outside of North America) are higher. The height dif- ference is in the range of , based on the adjustment of the load sensor. ** Washers with air operated water valves. Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 17 12. Hot water inlet 13. Compressed air inlet 14. Entry main power cable 15. Main switch 16. Drain outlet 17. Electric switchboard cover 18. Serial plate Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 18 30.24 [768] 31.30 [795] 7.76 [197] 7.76 [197] 7.76 [197] 14.96 [380] 20.75 [527] 22.13 [562] 26.18 [665] 25.59 [650] 29.80 [757] Table 2  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 19 1. Door securing latch 2. Compressed air inlet Figure 3 Specification 40 kg / 90 lb. / 400 L Models, in. [mm] 52.36 [1330] Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 20 20.43 [519] 90° 16.69 [424] 175° 23.86 [606] 34.45 [875] 29.88 [759] 30 [762] 15° 25.16 [639] 75.67 [1922] 76.02 [1931] 89.37 [2270] Table 3 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 21 78.74 [2000] 49.61 [1260] E - without load 34.17 [868] 30.91 [785] 31.89 [810] 64.84 [1647] 70.67 [1795] 8.19 [208] 10.83 [275] Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 22 20.71 [526] 90° 16.69 [424] 175° 23.54 [598] 34.33 [872] 30.16 [766] 30.39 [772] 13° 25.04 [636] 79.88 [2029] 76.69 [1948] 89.92 [2284] Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 23 80 kg / 180 lb. / 800 L Models, in. [mm] 87.20 [2215] 75.12 [1908] 72.83 [1850] 40.83 [1037] 38.90 [988] 61.61 [1565] 40.12 [1019] 79.53 [2020] 27.76 [705] Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 24 16.69 [424] 146° 21.30 [541] 8.62 [219] 38.03 [966] 33.50 [851] 31.97 [812] 97.48 [2476] 38.70 [983] 32.95 [837] 15° 93.70 [2380] 79.09 [2009] Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 25 78.54 [1995] 83.46 [2120] E - without load 40.55 [1030] 36.81 [935] 38.58 [980] 53.78 [1366] 64.57 [1640] 15.39 [391] 6.10 [155] Table 6  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 26 7.87 [200] 146° 22.36 [568] 40.59 [1003] 35.04 [890] 33.78 [858] 13° 30.63 [778] 90.24 [2292] 79.88 [2029] 95.83 [2434] 36.42 [925] 15.59 [396] Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 27 78.9 [2004] 76.61 [1946] 45.59 [1158] 41.81 [1062] 73.03 [1855] 43.11 [1095] 82.68 [2100] 27.36 [695] 24.02 [610] 20.12 [511] 6.10 [155] Table 7  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 28 17.52 [445] 150° 20.75 [527] 4.06 [103] 41.14 [1045] 36.69 [932] 35.43 [900] 101.38 [2575] 40.43 [1027] 34.69 [881] 15° 99.76 [2534] 82.60 [2098] Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 29 100 kg / 230 lb. / 1000 L Models, in. [mm] 75.59 [1920] 81.10 [2060] 86.42 [2195] E - without load 41.85 [1063] 38.15 [969] 39.17 [995] 54.88 [1394] 65.67 [1668] Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 30 3.82 [97] 150° 21.81 [554] 40.55 [1030] 36.61 [930] 35.04 [890] 13° 31.69 [805] 93.11 [2365] 82.76 [2102] 99.13 [2518] 37.48 [952] 16.22 [412] Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 31 14. Entry main power cable 15. Main switch 16. Drain outlet 17. Electric switchboard cover 18. Serial label 19. Door securing finger backstop 20. Finger complete Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 32 20.12 [511] 10.67 [271] 150° 25.63 [651] 40.55 [1030] 36.06 [916] 34.17 [868] 103.46 [2628] 40.47 [1028] 34.72 [882] 15° 100.51 [2553] 83.62 [2124] Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 33 78.74 [2000] 84.45 [2145] 87.60 [2225] E - without load 41.26 [1048] 37.13 [943] 38.58 [980] 57.72 [1390] 65.51 [1664] 15.00 [381] Table 10  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 34 7.95 [202] 150° 26.22 [666] 40.00 [1016] 35.83 [910] 34.65 [880] 13° 31.54 [801] 97.60 [2479] 83.78 [2128] 101.02 [2566] 37.32 [948] 17.36 [441] Table 10 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 35 65.67 [1668] 65.59 [1666] 53.78 [1366] 54.88 [1394] 54.80 [1392] E - bottom of door opening 40.55 [1030] 41.85 [1063] 41.26 [1048] Table 11  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 36 91.65 [2328] 94.88 [2410] 98.23 [2495] 17.32 [440] 17.72 [450] 16.10 [409] 11.54 [293] 11.93 [303] 10.31 [262] 93.90 [2385] 97.48 [2476] 98.82 [2510] Table 11 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 37: Mounting Bolt Hole Locations

    125 lb. / 335 L, in. [mm] 400 L, in. [mm] 520 L, in. [mm] Machine 38.18 [970] 42.13 [1070] 49.21 [1250] Table 12  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 38 29.52 [750] 5.9 [150] 7.08 [180] 7.87 [200] 39.36 [1000] 27.55 [700] * hole optimalized for new floor, drilled hole can be smallish dimension Table 12 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 39 1000 L, in. [mm] 1200 L, in. [mm] Machine 51.57 [1310] 54.64 [1388] 55.11 [1400] 41.92 [1065] 52.44 [1332] 52.44 [1332] 30.70 [780] Table 13  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 40: Floor Mounting Layout

    The waste piping or outlet channel must be dimensioned to the discharged water quantity and the number of washing machines. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 41: Installation

    1. All passages and spaces the machine has to be transported through at installation should be reasonably dimensioned to meet the height and width of the machine including the pack- age. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 42: Machine Anchoring

    M16 x 160, refer to Figure 12 155 [210] Anchoring bolt, refer to Figure 15 59 [80] Threaded rod, refer to Figure 15 98 [133] Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 43: Machine Anchoring - 40 - 55 Kg / 90 - 125 Lb. / 400 - 520 L Models With Forward Tilting

    1. Threaded rod M14 x 120 and chemical filling are not sup- plied with the machine 2. Anchoring bolt (supplied with the machine) Figure 15 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 44: Models With Forward Tilting

    3. Place the anchor bolt into the pre-drilled hole and place the machine in position (the bolt goes through the air spring plate). 4. Attach the washer and nut back again and tighten. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 45 The bolt must be in the middle of the slotted hole of the arm (Detail G). © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 46: Models Outside Of North America With Two-Way Tilting

    53.66 [1363] 54.05 [1373] 57.32 [1456] 69 [1750] 71.50 [1816] 9.25 [235] 9.25 [235] 9.25 [235] 5 [127] 4.92 [125] 5.43 [138] 0.7 [18] 5.51 [140] © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 47 The X dimension is the same for both sides. Detail View F shows the adjustment of free play between the plates on both sides. The distance shall be 0.04 in. [1 mm]. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 48: Weighing System Installation - Models Outside Of North America

    7. Use a water-level to check that the lower frame of machine is positioned totally level. 8. Attach hoses for water supply to the machine. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 49: Putting Machine Into Service

    2. One brace is located in the front part of the machine accessi- ble after removal of the front lower cover, refer to Figure 26 . © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 50 Figure 28 ces are on the left side of the machine and three are on the right, accessible after the removal of the side covers. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 51: Drain Connection

    180 - 275 lb. / 800 - 1200 L machines, from the front view, drum should rotate clockwise. 7. Vibration switch and emergency function are working proper- ly during extraction. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 52: Water Connection

    Hot Water IMPORTANT - Temperature in Wash Tub © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 53: Water Consumption

    Electrical shock hazard will result in death or serious ductors only. injury. Disconnect electric power and wait ten (10) minutes before servicing. W911 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 54: Residual Current Device (Rcd) - Models Outside Of North America

    5. Phase conductors 6. Protective conductor 7. Main switch inlet terminal switchboard 8. Neutral conductor Figure 32 IMPORTANT: Alliance Laundry Systems warranty does not cover components that fail as a result of improper input voltage. © Copyright, Alliance Laundry Systems LLC - Part No.

  • Page 55: Supply Cable

    2. Strip the conductor ends. Refer to Figure 33 . The protection conductor must be longer so it can be routed to the machine without tension. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 56 (main switch [1]), marked with L1/U, (L2/V), (L3/W), (N) and the terminal marked with PE. Refer to Figure 34 or Figure 34 Figure 35 . © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 57: Machine With Tilting

    Figure 37 for 80 - 120 kg / 180 -275 lb. / 800 - 1200 L Models. 1. Power supply cable 2. Back of machine 3. Tilting base Figure 37 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 58: Machine Protective Earth Connection And Equipotential Bonding

    1. Washing machine 2. Laundry protective earth connection 3. Washing machine external protective terminal 4. Protective conductor - washing machine connection 5. Earth mark Figure 38 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 59: Input Power Conditioning

    W810 IMPORTANT: All quick disconnects should comply with the specifications. DO NOT use fuses instead of circuit breakers. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 60: Connection Specifications

    IMPORTANT: Do not use a phase adder on any ma- chine. Thermal Overload Protector For models with inverter drives, the inverter drive provides over- load protection for the drive motor. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 61: Electrical Specifications - Models Outside Of North America

    50-60 3 (L1, L2, L3) 105 (36) 380-415 50-60 3 (L1, L2, L3) 62.5 (36) 440-480 50-60 3 (L1, L2, L3) 58 (36) Table 20 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 62 50-60 3 (L1, L2, L3) 195 (67.5) 380-415 50-60 3 (L1, L2, L3) 113 (67.5) 440-480 50-60 3 (L1, L2, L3) 106 (70) Table 22 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 63 Fuse (A) 200-240 50-60 3 (L1, L2, L3) 37.8 380-415 50-60 3 (L1, L2, L3) 29.4 440-480 50-60 3 (L1, L2, L3) 29.4 Table 24 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 64: Electrical Specifications - North America Models

    Full Load Circuit Code Voltage Cycle Phase Wire Amps Breaker 208-240 3 (L1, L2, 7 (10) 400-480 3 (L1, L2, 25.2 9 (6) Table 28 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 65: Steam Connection

    80 - 120 kg / nection size, in. 180 - 275 lb. / 800 - 1200 L Steam pressure, 44 - 116 [3 - 8] PSI [bar] Table 30 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 66: Press Air Connection

    Take care that this installation can Connection point for soap supply, refer to Machine Dimensions. not create any injury at any point. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 67: Electrical Connection Of Liquid Soap

    Only authorized workers by a hose clamp. with a valid qualification must execute the electrical connection on the machine according to the valid local standards. The correct © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 68: Electronic Controller With Blue Pcb And Graphical Display

    "P", fix up the cable by tightening the cable bushing against disconnection and close the box with the cover. For details about liquid soap supply system programming, refer to Programming Manual. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 69 80 - 120 kg / 180 - 275 lb. / 800 - 1200 L Models Electrical connection label 24V AC (MAX 10mA/supply) H804 524740 CFD1327N 1. Plastic connections box 2. Terminal box 3. Cable bushing Figure 45 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 70: Operation

    After completion, the door lock unlocks and the display drum is rotating. shows “UNLOAD”. W916 c. Tilt the machine to the basic position. 6. Turn the handle up to close the door. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 71: Hanging Control (Models With Tilting System)

    4. Button for tilting, direction of tilting is backward to basic position. 5. Button for permission of washer tilting - two-hand control. 6. Button for permission of drum rotation - two-hand control. Figure 47 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 72: Maintenance

    (the laundry main valves and switches). Monthly or After 200 Working Hours 1. Lubricate seal and bearings with 2 strokes (2 cm ). Refer to Figure 48 . © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 73: Every 3 Months Or After 500 Working Hours

    VG32 [ISO 3448]). 1. Condensation trap 2. Pressure regulator 3. Lubricator pot Figure 49 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 74 D - bolts fixing the inner drum M30 x 80 590 [800] to the shaft E - bolts fixing the door brack- M12 x 38 18.5 [25] Table 32 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 75 100 - 120 kg / 230 - M10 x 60 32 [44] 275 lb. / 1000 - 1200 L Table 33  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 76: Every 6 Months Or 1000 Working Hours

    Clean the sieve with running water or compressed air. 6. Check if external ventilator (if present) is functional. • Put the sieve and gasket back to the filter body and tighten the plug. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 77 / 400 - 520 L 1200 L Force F measured by de- vice, N Frequency measured by 36 - 37 35 - 37 device, Hz Table 35 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 78: Every 12 Months

    80 - 120 kg / 180 - 275 lb. / 1000 - 1200 L Models 1. Set a distance of 0.47 in. [12 mm] between the limiters. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 79: Belt Replacement

    2. Handle sleeve 3. Door carrier beam 4. Semicircle cuts 5. Handle pin 6. Hinge bolt 7. Hinge 8. Elimination washer 9. Door Figure 55 © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 80 5. Check to make sure the door hinge does not move while opening and closing the door. 6. If the thrust adjusting has not been sufficient, replace the door seal. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 81: Spring Unit

    80 - 120 kg / 180 - 275 lb. / 800 - 1200 L Models © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 82: Unblocking The Door Lock In Case Of Emergency

    .21 in. [5.5 mm] , insert the tool through the finger pro- tection hole into the lock cover and push softly. Refer to Fig- ure 59 . © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...
  • Page 83 4. The latch mechanism is lifted up and the lock is unblocked. The lock stays unblocked even after the tool removal. 5. Open the door if all safety conditions are fulfilled. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 84: Care Of Stainless Steel

    Locate the pump and tubing below the machine’s injection point to prevent siphoning of chemicals into the machine. © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

  • Page 85: Disposal Of Unit

    The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact the local city office, © Copyright, Alliance Laundry Systems LLC - Part No. D1627ENR5 DO NOT COPY or TRANSMIT...

Table of Contents