MOTO GUZZI V7 Stone Servise Manual page 71

V7 Stone - V7 Special - V7 Racer
TABLE O
1. Neutral switch connector
2. Right Lambda probe connector
3. Cable tie that joins the switch connectors and
the right lambda probe
TABLE P
1. Battery positive
Check the cable which goes from the battery positive to the fuse box to be sure it is covered
•
by the sheath and that the terminal is covered by the heat-shrink.
2. Battery negative
Check that the end of the engine ground leads is positioned as illustrated in the image and
•
that there is perfect surface contact once the screw is tightened.
3. Taillight connector
4. Speed sensor connector
5. Clamps
Electrical system
ELE SYS - 71