MOTO GUZZI V7 Stone Servise Manual page 193

V7 Stone - V7 Special - V7 Racer
Fit the exhaust mounting plate preset
•
for fixing the passenger footrest, so as
to turn the vehicle into a two seater
version.
Tighten the three fastener screws to
•
the specified torque.
Fit the countersunk screw with hexag-
•
onal hole on "C" supporting the pedal
and afterwards fit the washer.
Place "C" on the exhaust supporting
•
plate, pay attention that the holes to in-
sert the pedal are adequately oriented.
Hold the countersunk screw with hex-
•
agonal hole firmly in place and tighten
the nut to 25 Nm (18.44 lbf ft).
Position the pedal on "C" and insert the
•
fixing pin.
Pre-delivery
PRE DE - 193