Chassis
Slide off the tapered bearing from the
•
case.
Controllo
Check that the pinion toothing is not damaged, worn or deformed; otherwise, replace the
•
pair.
Check that both tapered bearings are not damaged, that the rollers are not damaged or
•
worn; otherwise, replace them.
Check that the adjustment washers are not deformed or broken; otherwise, replace them.
•
Check that the sealing rings are not shattered, spoiled or worn; otherwise, replace them.
•
Montaggio
If the bevel pinion should be replaced,
•
replace also the crown fitted on the
housing. The pinion and the crown
should have the same number stam-
ped.
CHAS - 158
V7 Stone - V7 Special - V7 Racer