Controls System Maintenance; Adjusting The Reel Control - Toro 04042 Operator's Manual

1
Figure 44
1. Engaged
2
G019886
2. Disengaged
Controls System
Maintenance

Adjusting the Reel Control

If the reel control does not properly engage, an adjustment
is required.
1. Turn off the machine and disconnect the battery pack.
2. Ensure that the reel control is disengaged.
3. At the transmission bulkhead, adjust the reel control
cable (Figure 45), to attain a spring length of 70.6-72.4
mm (2.78-2.85 inches).
1
2
1. Reel control cable
4. At the control handle bulkhead, loosen the reel control
cable until there is slack in the cable (Figure 46).
36
G017384
Figure 45
2. Jam nuts