Premaintenance
Procedures
Disconnecting the Battery
Before performing maintenance on the machine, disconnect
the machine from the battery pack by pulling the T-handle
connector off of the main power supply connector.
1
G017237
Figure 33
1. T-handle connector
2
2. Main power supply
connector
Lubrication
Greasing the Motor Coupler
Service Interval: Yearly
Grease Type: General-purpose grease.
1. Turn off the machine and disconnect the battery pack.
2. Remove the 2 bolts securing the motor to the
transmission case (Figure 34).
G017383
1
1. Coupler—female
2. Motor shaft
3. Pull the motor out and away from the transmission
case.
4. Add one to two pumps of grease from a grease gun to
the female coupler in the transmission case (Figure 34).
5. Install the motor and secure it with the 2 bolts removed
previously. Torque the bolts to 29 to 33 N-m (21 to
25 ft-lb).
31
2
3
4
Figure 34
3. Bolt
4. Electric motor