Specifications; Attachments/Accessories - Toro 03170 Operator's Manual

Fuel Gauge
The fuel gauge (Figure 34) registers the amount of fuel
in the tank.
Figure 34
1. Fore and aft lever
Fore and Aft Seat Adjustments
Move the lever (Figure 34) on the side of the seat
outward, slide the seat to the desired position, and
release the lever to lock the seat into position.

Specifications

Note: Specifications and design are subject to change
without notice.
Transport Width
Width of cut
Length
Height
Net weight*
Fuel tank capacity
Ground speed
* With cutting units and fluids

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
2. Fuel gauge
80" (203 cm) in 72"
(183 cm) width of cut
92" (234 cm) in 85" (216
cm) width of cut
72" (183 cm) or 85" (216 cm)
width of cut
93" (248 cm)
71" (180 cm) with ROPS
1860 lbs. (844 kg)
7.5 gallons (28 liters).
Mow: 0-6 mph (0-10 km/h);
Transport: 0-9 mph (0-14
km/h). Reverse: 0-4 mph. (0-6
km/h).
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
26