Heart Rate Alert; Calibration, Speed And Targets; Calibration - Oregon Scientific SE300 User Manual

HEART RATE ALERT

You can set the heart rate alert in the exercise profile to the following
settings:
When the heart rate alert is activated, a flashing down or up arrow will
appear on the display to show which heart rate limit you have surpassed.
rate than the sound alarm.

CALIBRATION, SPEED AND TARGETS

CALIBRATION

Before you use the speed and distance function, you have to set a real
calibration or parameter. To set the real calibration you pre-set a distance
to get a rough estimate of your speed when running this distance. You
have to run the distance and then set the real calibration. You can set the
SE300_M_EN_USA.indd 18
MHR LOWER LIMIT
MHR = MHR x lower target
220 - age activity %. E.g.
Target activity is
WALK Lower Limit
= MHR x 65%
ICON DESCRIPTION
Heart rate sound and vibration alert are OFF
Heart rate sound alert is ON
•
•
Heart rate vibration alert is ON
Heart rate sound and vibration alert are ON
NOTE Using the vibration feature consumes battery life at a faster
1 beep means you have gone below your
lower zone limit
2 beeps means you have gone above your
upper zone limit
18
UPPER LIMIT
MHR x upper
target activity %.
E.g. Target activity
is WALK Upper
Limit = MHR x 78%
8/31/06 12:13:07 PM