Radio Check Function - Icom IC-F9011B Operating Manual

4
APCO P25 MODE OPERATION
n Radio Check function
D Transmitting
A Radio Check function allows an operator to know if the tar-
get station is within communication range.
The target station transceiver automatically responds after
receiving a radio check signal.
[Digital Button] key assignment is necessary to transmit the
radio check signal.
Not available on Non-display types.
✔ For Trunking mode operation:
This function is usable only for a dispatcher in the Trunking
mode.
q Push [Digital Button] to enter the digital call type selec-
tion mode.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select "RDO CHECK."
For Handhelds:
RDO CHECK
DSEL PAGE
43
For Mobiles:
R D O C H E C K
STAT
e Push [Digital Button] again to enter the Individual ID se-
lection mode.
• A preset ID name is displayed.
• When the ID name is not programmed, the ID code is dis-
played.
For Handhelds:
RDO CHECK
INDIVIDUAL1
DSEL PAGE STAT
r Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select a desired ID (or name).
• Hold down [Digital Button] for 1 second to cancel and return to
normal operation.
• The ID can be edited with the 10-keypad, depending on the
presetting. (10-key types only) See page 32 for editing details.
For Mobiles:
R D O C H E C K
I N D I V I D U A L 1