Ending - Epson EMP-715 Owner's Manual

I Ending
End projection in accordance with the following procedure.
1
Switch off the power supply to the connected equipment.
2
Press the [Power] button.
A message to confirm that the power needs to be switched off will be displayed.
Power
3
Press the [Power] button once more.
The lamp will be extinguished, the Operation Indicator will blink in orange, and the cool-
down process will commence.
Power
The Operation Indicator will change from blinking to being illuminated in orange once the
cool-down process has been completed. The cool-down period will take approximately
ninety seconds (depending on the surrounding temperature).
Point
· Press a different button if you do not want to turn off the projector. The message will be
erased after seven seconds if no buttons are pressed (the power will remain on).
· Button operations are not possible when the Operation Indicator is blinking in orange. In
this event, please wait until full illumination has been attained.
Power
Help
Source
Enter
Power OFF?
Please press
to power off.
Power
Help
Source
Enter
Power
Key again
Power
Power
Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc
Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc

Ending - 35