Range Of Remote Control Operations - Epson EMP-715 Owner's Manual

Range of Remote Control Operations

Depending on the distance and angle from the main unit's light receiving area, there are cases
where the remote control will not function. Ensure that the remote control is used within the fol-
lowing conditions:
G Operable distance: Approximately 10 metres
G Operable range:
Point
· Ensure that the [R/C ON OFF] switch is set at [ON] when using the remote control unit.
· Aim the remote control at the projector's light-receiving area.
· There are cases where the operable distance (approximately 10 meters) of the remote
control is diminished when signals are reflected off screens depending on the type of
screen in use.
· Ensure that sunlight and florescent lighting is not shining directly into the projector's light-
receiving area.
· If the remote control will not function or malfunctions, there is a possibility that the batter-
ies need changing. In this event, replace the batteries accordingly.
Approximately 15 degrees up and down
Approximately 30 degrees to
the left and right
Mouse/Com
Parts, Names and Operations - 15