Keystone Adjustment - Epson EMP-715 Owner's Manual

Keystone adjustment

Make the necessary adjustment when the screen has been distorted into a trapezoid with foot
adjustment.
1
Press the [Keystone +, -] button on the projector to change the screen into a rectangle.
Power
Help
Source
Enter
The corrected screen will shrink in size.
It is possible to make adjustments with keystone correction (through 30 stages) as long as
the tilt angle of the projector is within a maximum vertical range of approximately 15
degrees.
The maximum value of the tilt angle will differ slightly in accordance with the projected
size adjusted with the zoom.
Approximately
15 degrees upwards
Approximately
15 degrees downwards
Point
· The screen will be reduced in size when keystone correction has been performed.
· The details of trapezoid correction will be stored. This must be readjusted to match the
installation status after the projection position and angle have been amended.
· Reduce the sharpness if blurring occurs after keystone correction. (see page 60)
· Keystone correction is performed from the menu. (see page 62)
40 - Adjusting the Projection Size
Power
Keystone
Source
Enter
The corrected screen will shrink in size.
Help
Keystone
Mouse/Com