Projection; Preparations - Epson EMP-715 Owner's Manual

This section provides explanations on starting and ending projection, and on the basic
functions for adjusting projected images.
I Projection
Images can be projected after all connections have been completed.

Preparations

· Never look directly into the lens once the power supply has been switched on. Failure to
observe this may result in the powerful light damaging eyesight.
· Ensure that the Power Cord supplied is used. The use of cables other than the one supplied
may result in the outbreak of fire or electric shocks.
Do not perform any projection tasks with the Lens Cover attached. Failure to observe this
may result in the cover becoming malformed due to heat.
1
Connect the projector to a computer and video equipment. (see page 20, 27)
2
Rotate the zoom lever to the central position to extend the lens.
Images will be out of focus when projected if the zoom lever is not moved to the central
position.
3
Remove the Lens Cover.

30 - Projection

Projection
Warning
Caution
Zoom Lever