1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EMP-503 - SVGA LCD Projector
  6. Owner's manual

Epson EMP-503 Owner's Manual

Epson owner manual projector emp-503 / 703 / 713
Hide thumbs Also See for EMP-503:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Reference Manual

Advertisement

Table of Contents
loading

Related Manuals for Epson EMP-503

Summary of Contents for Epson EMP-503

  • Page 2: Important Information

    Please read the following important information about your projector. Important Safety Information Warning: Never look into the projector lens when the lamp is switched on as the bright light can damage your eyes. Never let children look into the lens when it is on.
  • Page 3 ® D A T A / V I D E O P R O J E C T O R Owner’s Manual...

  • Page 5: Table Of Contents

    Contents Contents Introduction Getting the Most Out of Your Projector ... ix Optional Accessories...ix About This Manual... x Safety Instructions ... xi Where to Get Help ... xiii World Wide Web site...xiii Transporting your projector... xiv 1 Installation Unpacking the Projector...2 Additional Components...
  • Page 6 2 Using the Projector Turning the Equipment On and Off ...29 Turning the Projector On and Off ... 29 Focusing and Positioning the Screen Image ...31 Resize Button... 33 Controlling the Projector...34 Using the Remote Control ... 35 Using the Operation Panel ... 38 Projector Status Indicators ...39...
  • Page 7 5 Troubleshooting Problems with the Projector...64 Problems with the Image or Sound ...66 Technical Specifications Supported Monitor Displays ...71 Computer In connector pin assignments ...73 Glossary Index World-Wide Warranty Terms...
  • Page 8 Contents...

  • Page 9: Introduction

    Images are displayed in full color (16,670,000 colors) at a XGA resolution of 1024 x 768 pixels (EMP-713/703) and SVGA resolution of 800 x 600 pixels (EMP-503). Your projector produces bright images that can be easily seen in rooms light enough to take notes.
  • Page 10 Your projector features the newest resizing technology DAR (Digital Active Resizing) which supports VGA~UXGA computer output (The EMP-503 does not support UXGA). No matter what type of computer output is used, the result is a full-size video image of outstanding clarity.

  • Page 11: Getting The Most Out Of Your Projector

    To get the most out of your projector, read this section for a quick summary of the important features. Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: • Image Presentation Camera • Image Presentation Camera (XGA) •...

  • Page 12: About This Manual

    About This Manual Chapter 1, “Installation”, gives step-by-step instructions on how to set up the projector and connect it to your computer, video source, or other external speaker or PA system. Read the installation procedures that apply to your configuration.

  • Page 13: Safety Instructions

    Safety Instructions Follow these safety instructions when setting up and using the projector: 1. Do not place the projector on an unstable cart, stand, or table. 2. Do not use the projector near water or sources of heat. 3. Use attachments only as recommended.
  • Page 14 11. Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not place the projector on a sofa, rug or other soft surface, or in a closed-in cabinet unless proper ventilation is provided.

  • Page 15: Where To Get Help

    World Wide Web site If you connect to the Internet and have a Web browser, you can access to EPSON’s World Wide Web site at http:// www. epson. com. EPSON’s home page provides you What’s New, EPSON Products, EPSON Connection, Corporate Info and EPSON Contacts.

  • Page 16: Transporting Your Projector

    • When transporting the projector for business use, first put the projector in a hard carrying case, then pack it in a firm box, using cushioning around the case. ♦ Note: EPSON shall not be liable for any damages incurred during transportation. Introduction...

  • Page 17: Installation

    You may also want to set up the projector for one or more of the following: • Connect the mouse cable to use the remote control as a wireless mouse.

  • Page 18: Unpacking The Projector

    Unpacking the Projector When you unpack the projector, make sure you have all these components: • Projector • Remote control • 2 AA batteries • Power cord • Computer cable • Audio/Video cable (A/V cable) • PS/2 mouse cable • USB mouse cable •...

  • Page 19: Additional Components

    Additional Components Depending on how you plan to use the projector, you may need these additional components: • To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) A separate cable is required for each video source.

  • Page 20: Setting Up The Projector

    40 inches (81x61cm) 30 inches (61x46cm) 26 inches (53x40cm) 3. Turn the projector so that the lens is at right angles to the screen. If the projector is not angled correctly, the screen image will be crooked. 4. Connect one end of the power cable to the projector’s power connector.
  • Page 21 If fluid gets on your hands, wash them immediately. • Remove the batteries if you will not be using the projector for a long period of time. Setting Up the Projector...

  • Page 22: Connecting To A Computer

    Connecting to a Computer You can connect the projector to a computer capable of VGA, SVGA, XGA, SXGA and UXGA output (The EMP-503 does not support UXGA). To connect the computer and mouse cables (to use the wireless remote as a mousepointer), see the section in this chapter that applies to your computer.

  • Page 23: Connecting To A Pc Desktop Computer

    Connecting to a PC Desktop Computer To connect the projector to your PC desktop computer, you need to: • Connect the computer cable • Connect the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect.
  • Page 24 If you want to use the remote control as a mouse, you need to connect the PS/2 mouse cable or USB mouse cable. ♦ Note: The USB mouse port on the projector can only be used by connecting a USB mouse. It is not possible to connect other USB equipment for use.

  • Page 25: Connecting The Audio Cable

    Connecting the Audio Cable 1. If you will be using audio, connect one end of the audio cable to the Audio In jack on the projector. Audio in jack 2. Connect the other end of the audio cable to the speaker or audio out port on the computer’s sound card.

  • Page 26: Connecting To A Pc Laptop Computer

    ♦ Note: Laptop configurations vary. See your computer manual for the location of the ports needed to connect your projector. Connecting the Computer Cable First connect the projector’s computer cable to your laptop. 1. Connect one end of the computer cable to the projector’s Computer port.
  • Page 27 If you want to use the remote control as a mouse, you need to connect the PS/2 mouse cable or USB mouse cable. ♦ Note: The USB mouse port on the projector can only be used by connecting a USB mouse. It is not possible to connect other USB equipment for use.
  • Page 28 ♦ Note: You may have to set the display to appear on both the laptop’s screen and the projector. Some laptops let you change this setting with the keyboard’s function keys or by using a setup utility provided by the computer manufacturer. Check your laptop’s manual or online help for instructions.

  • Page 29: Connecting To A Desktop Macintosh

    Connecting to a Desktop Macintosh To connect the projector to your desktop Macintosh, you need to: • Connect the computer cable • Connect the mouse cable (if you want to use the remote control as a mouse) • Connect the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect.
  • Page 30 1. Connect one end of the computer cable to the projector’s Computer port. 2. Remove the small cover on the Macintosh desktop adapter and set its DIP switches in accordance with the resolution you want to use (such as 16-inch mode). See your...
  • Page 31 If you want to use the remote control as a mouse, you need to connect the USB mouse cable. ♦ Note: The USB mouse port on the projector can only be used by connecting a USB mouse. It is not possible to connect other USB equipment for use.
  • Page 32 1. Connect one end of the projector’s USB mouse cable to the USB Mouse port on the projector 2. Disconnect your Macintosh’s mouse cable. Connect the other end of the projector’s USB mouse cable to the mouse port on your Macintosh.

  • Page 33: Connecting To A Powerbook

    Your PowerBook must have video-out capability in order to connect to the projector. To connect the projector to your PowerBook, you need to: • Connect the computer cable • Connect the mouse cable (if you want to use the remote control as a mouse) •...
  • Page 34 See your PowerBook manual for additional information on connecting a computer cable. 1. Connect one end of the computer cable to the projector’s Computer port. 2. Remove the small cover on the Macintosh desktop adapter and set its DIP switches in accordance with the resolution you want to use (such as 16-inch mode).
  • Page 35 3. Connect the small terminal of the Macintosh desktop adapter to the other end of the computer cable. 4. Connect the computer cable (with the optional Macintosh desktop adapter) to the video-out port on the PowerBook. If a video-out cable was provided with your PowerBook, connect the smaller end of the video-out cable to the video- out port on the back of the PowerBook.
  • Page 36 If you want to use the remote control as a mouse, you need to connect the USB mouse cable. ♦ Note: The USB mouse port on the projector can only be used by connecting a USB mouse. It is not possible to connect other USB equipment for use.
  • Page 37 PowerBook. ♦ Note: After you turn on the projector and computer, you’ll need to choose Mirroring in the Display Control Panel if you set up your configuration to display on the LCD screen as well as the projector screen.

  • Page 38: Connecting To A Video Source

    S-Video cable supplied with your video device or obtain one from your computer or video equipment dealer. To connect a video source to the projector: 1. Turn off the projector and video source if they are on. S-Video 4-pin, mini-DIN...
  • Page 39 4. Connect the RCA audio cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plug at the other end of the RCA audio cable to the audio output jacks of the video source.
  • Page 40 6. Connect the RCA audio cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plug at the other end of the RCA audio cable to the audio output jack of the video source.

  • Page 41: Connecting To An External Speaker Or Pa System

    RCA-to-3.5 mm stereo audio cable. You can get one from your computer dealer. 1. Turn off the projector and speaker or PA system if they are 2. Connect the cable’s 3.5 mm stereo miniplug to the projector’s Audio Out jack.

  • Page 43: Using The Projector

    • Turning the equipment on and off • Focusing and positioning the screen image • Controlling the projector with the remote control and the operation panel • Monitoring the projector’s operating status...
  • Page 44 The illustration below identifies the parts of your projector. operation indicator operation panel remote control receiver zoom ring focus ring front foot speaker foot adjust lever...

  • Page 45: Turning The Equipment On And Off

    When you turn off the equipment, do so in the reverse order. Turning the Projector On and Off 1. Remove the projector lens cap. 2. When you plug in the projector power cord, the power indicator flashes orange for few seconds. Then the light remains orange.
  • Page 46 When the projector has cooled down, the operation indicator stops flashing and remains orange. ♦ Note: If you press the Power button to turn the projector back on while the operation indicator is orange, there may be a delay before a projected image appears.

  • Page 47: Focusing And Positioning The Screen Image

    Focusing and Positioning the Screen Image When an image appears on the screen, check that it is in focus and correctly positioned on the screen. • To focus the image, rotate the focus ring (the outer ring on the lens). •...
  • Page 48 If you need to raise or lower the image on the screen, extend or retract the two feet at the bottom of the projector as follows: 1. Stand behind the projector and support the front of it while you lift the foot adjust levers above the feet. This unlocks the feet so they can move up and down freely.

  • Page 49: Resize Button

    With images up to XGA size (1024 × 768) for the EMP-713/ 703 or SVGA size (800 x 600) for the EMP-503, you can choose from two projection methods. You can either display the image in the center of the projection area(Window display) or display the image full size(Resize display).

  • Page 50: Controlling The Projector

    Controlling the Projector You can use the operation panel on top of the projector or the remote control to perform the following actions: • Turn the power on or off • Auto set-up of the computer image • Switch between input images (Computer, video-computer) •...

  • Page 51: Using The Remote Control

    To be able to use the remote control as a cordless mouse, connect the mouse cable to the projector and your computer. You can use the remote control up to 10 metres (30 feet) from the projector.
  • Page 52 Function Keeps the current computer or video image on the screen. Turns off the audio and video output of the projector. To turn on the audio and video output, press either the A/V mute button or Esc button again. Pressing the right side of the button enlarges the image, pressing the left side of the button reduces the image.
  • Page 53 The default settings are as follows; Subscreen size:1/9 division Main screen input source:Computer Subscreen input source:Video To change the subscreen position, press the Enter button. The subscreen will move to the selected direction. Volume +/- Adjusts the volume. Controlling the Projector...

  • Page 54: Using The Operation Panel

    Using the Operation Panel Enter button You can use the operation panel to control the projector instead of the remote control. However, you can program and access the custom features only using the remote control. The following table summarizes the functions on the operation panel.

  • Page 55: Projector Status Indicators

    Projector Status Indicators The power and lamp indicators at the top of the projector tell you its operating status. ♦ Caution: A red indicator warns you if a serious problem occurs. See Chapter 5, “Troubleshooting,” for what to do if a warning light comes on.

  • Page 56: Temperature Indicator

    Lamp Indicator Displays lamp condition. This indicator is off when the projector is in a normal condition. Color Orange Temperature Indicator Displays the internal temperature condition. This indicator is off when the projector is in a normal condition. Color Orange...
  • Page 57 If the projector overheats, check the following 2 points and make the necessary improvements. • Is the projector installed in a place with good ventilation? Make sure the air intake and exhaust vents are not covered, and that it is not placed up against the wall.

  • Page 59: Using The Projector Menus

    Using the Projector Menus he eight projector menus let you to control your projector. • The Video menu controls the look and quality of the projected image, whether the image source is a computer or video. • The Audio menu controls audio features, such as the volume level, tone setting.

  • Page 60: Accessing The Main Menu

    Accessing the Main Menu To display the Main menu, press the Menu button on the remote control. The Main menu appears: Press the Menu button again to hide the menu. Video Position Adjustment Audio Tracking 9999 Effect Sync. Setting Brightness User's Logo Contrast Advanced...

  • Page 61: Changing A Menu Setting

    Changing a Menu Setting To change a menu setting: 1. Press the Menu button on the remote control to display the Main menu. 2. Press the top or bottom of the Enter button to scroll through the menu choices. Enter button 3.
  • Page 62 As you select a menu, a sub menu of options appears to the right. ♦ Note: The options available in some submenus vary, depending on whether the current image source is the computer or a video source. 4. Press the top or bottom of the Enter button to scroll through the menu choices.

  • Page 63: Menu Options

    The following options are available when the image source is Computer. ♦ Note: The computer must be connected and operating, and the image source on the projector must be set to Computer for you to access these menu options. Menu item Position Tracking Sync.
  • Page 64 Adjusts the color balance (Red:Green:Blue) of the input source. Select this item by pressing the Enter button. The projector will enter color adjustment mode. Use the Enter button to select a color. Next, use the Enter button to adjust the selected color.

  • Page 65: Video Menu (Image Source = Video)

    The following options are available when the image source is Video. ♦ Note: The projector’s image source must be set to Video, and the video source (such as a VCR or camcorder) must be connected and operating for you to access these menu options (for example, the projector must actually be projecting an image from a video tape, if you’re using a VCR).

  • Page 66: Audio Menu

    Menu item Mode Reset Audio Menu The Audio menu lets you make adjustments related to audio. Menu item Volume Tone Reset Description Specifies the image signal mode. User can select from Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL 60, SECAM. Returns all menu items to their initial factory defaults.

  • Page 67: Effect Menu

    If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings. Setting Menu The Setting menu lets you adjust or set the various projector options. Menu item Description Keystone Adjusts the trapezoid distorted image to normal.

  • Page 68: User's Logo Menu

    Temporarily displays a message on the projector screen to identify which source (computer or video) is providing the image. Turns off/on the audio/video output of the projector, clears all special effects, and displays a black, blue, or user logo screen.

  • Page 69: Storing A User Logo

    Storing a User Logo Follow these steps to capture and store a logo. 1. Display the image(with the projector) you wish to use as a logo. 2. Press the Menu button to open the Menu window. 3. Select the User’s Logo menu option by pressing the pointer button.

  • Page 70: Reset All Menu

    Assigning the Logo to the A/V Mute Button Follow these steps to assign the logo to the A/V Mute button: 1. Press the Menu button to open the Menu window. 2. Select the Setting menu and press the Enter button. 3.

  • Page 71: Advanced Menu

    Advanced Menu The Advanced menu enables you to set various projector options. Menu item Description Language Selects the menu language from Japanese, English, German, French, Italian, Spanish, Portuguese, Chinese and Korean. Startup Screen Displays the user logo during the warm-up after the projector is turned on.

  • Page 72: About Menu

    Displays the number of hours the current lamp has been used. The lamp light turns red when the projector lamp needs to be replaced. When this happens, replace the projector lamp with a new one as soon as possible. Displays the horizontal and vertical frequency of the computer.

  • Page 73: Maintenance

    If any other part needs replacing, contact your dealer or a qualified service person. ♦ Warning: Before you clean any part of the projector, turn off the projector and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely.

  • Page 74: Cleaning The Lens

    Cleaning the Projector Case To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent.

  • Page 75: Cleaning The Air Filter

    Cleaning the Air Filter Clean the air filter at the top of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filter, follow these steps: 1.

  • Page 76: Replacing The Lamp

    The replacement message is set to being displayed at about 900 hours of use. Contact your local EPSON dealer for a spare lamp. Request part number ELPLP14.
  • Page 77 2. Remove the lamp cover after the unit is cool. It will normally take about an hour to completely cool down. Loosen a lamp cover-mounting screw with the screwdriver provided with the spare lamp, then remove. 3. Loosen two mounting screws for the lamp with the same screwdriver, and pull out the lamp using the handle.

  • Page 79: Troubleshooting

    It is divided into the following sections: • Problems with the projector. See this section if the projector is not working and to find out what the warning lights are indicating. • Problems with the screen image. See this section if you cannot project an image or if the screen image is poor.

  • Page 80: Problems With The Projector

    Problems with the Projector If you have problems with the projector, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the warning lights at the top of the projector. These lights alert you to problems with projector operation.
  • Page 81 Make sure nothing is blocking the ventilation vents. The air filter may be clogged. Clean it as described on page 59 in Chapter 4 and then let the projector cool for a while. If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or internal circuits.

  • Page 82: Problems With The Image Or Sound

    Only part of the computer image is displayed. If the computer’s output resolution setting is higher than 1024 × 768 (EMP-713/703) and 800 x 600 (EMP-503), the projector resizes the image. If the computer output is not compatible with this resizing, choose a different display setting on the computer.
  • Page 83 First check that the volume setting is not turned all the way down and that the RCA audio cable is securely attached to both the projector and the audio source. Also, make sure that the Mute button is off. The wrong source is selected. Press either the Computer or Video button on the remote control or Source button on the operation panel to select the proper source.
  • Page 85 Projector Lamp Type Power Part number Poly-silicon TFT EMP-713/703: 1024 (horizontal) x 768 (vertical) pixels EMP-503: 800(horizontal) x 600(vertical) pixels 26-300 inch (1.1-13.8 meters) 32.8 feet (10 meters) 1W Monaural 4 : 3 (horizontal : vertical) 1:1.2 UHE Lamp (Ultra High Efficiency Lamp)

  • Page 86: Technical Specifications

    Mechanical Height Width Depth Weight Electrical Voltage Rated frequency Power supply Environmental Temperature Humidity Technical Specifications 7.4 inches (87 mm) Maximum dimension 19.8 inches (267 mm) Maximum dimension 12 inches (213 mm) Maximum dimension 5.8 lb (2.6 kg) 100 - 240 V 50/60 Hz 100 - 240 V 2.6 - 1.3A...

  • Page 87: Supported Monitor Displays

    (EMP-713/703) and 800 x 600 (EMP-503) pixels. To display a higher resolution image, the projector compresses it to 1024 x 768 (EMP-713/703) and 800 x 600 (EMP-503). The following table lists the display formats supported by the projector: Mode ACTIVE...
  • Page 88 640 480 720 540 SECAM 720 540 ♦ Note: The frequencies of some computers may not allow the image to be display correctly. * The EMP-503 does not support UXGA. Technical Specifications FREQUENCY H (KHz) V (Hz) Pixel (MHz) EMP-713/703 85.938 85.002...

  • Page 89: Computer In Connector Pin Assignments

    Computer In connector pin assignments The Computer In connectors are female video RGB, 15-pin micro-D-style connector. The pin assignments are: Input pin Signal Red analogue input Green analogue input Blue analogue input Red GND Green GND Blue GND Reserved Sync GND Horizontal sync/composite sync input Vertical sync input Computer In connector pin assignments...
  • Page 90 Technical Specifications...

  • Page 91: Glossary

    Glossary Brightness. The balance of light and dark shades in an image. Composite video. A type of video signal that encodes colours, luminance and sychronization information so it can be carried in one signal. Contrast. A measure of the luminance differences between the highlights and shadows of an image.
  • Page 92 Serial. A type of communication interface that transmits data over a single wire. Glossary...

  • Page 93: Index

    Index Audio cable 9 Audio In jack 9 Audio Menu 50 Audio Out jack 25 Brightness 75 Cleaning the Air Filter 59 Color 49 Contrast 75 cooling 64 DAR viii Effect Menu 51 External Speaker 1, 25 Format 71 Glossary 75 Image 66 Installation x, 1 Mac mouse cable 15...
  • Page 94 PA System 1, 25 PAL 75 pin assignments 73 Power cord 2 Projector ix PS/2 mouse cable 2, 8 RCA audio cable 23 RCA video cable 23 Resolution 66, 75 RGB 75 SECAM 75 Serial 76 Setting Menu 51 Sound 66...

  • Page 95: World-Wide Warranty Terms

    Note that product is not covered by the terms of warranty stated here, but by the terms of warranty laid out on the warranty card supplied when the equipment is purchased in each relevent country. The world-wide warranty for the Epson Multi-Media Projector is valid in the following countries: <Europe>...
  • Page 96 The period of warranty is twelve months from the date of purchase. The warranty will cover the cost of spare parts and labor in accordance with the conditions laid out by Epson within the applicable range of the warranty. The user will not be supplied with a substitute product during the period of repair as a basic policy.
  • Page 97 <EUROPE> AUSTRIA : EPSON Support Center Austria Tech. Help Desk: 0049 1805 235470 Web Address: http://www.epson.at BELGIUM : EPSON Support Center BeNeLux Tech. Help Desk: 032 70222082 Web Address: http://www.epson.be BULGARIA : PROSOFT 6. AI Jendov Str. BG-1113 Sofia Tel: 00359.2.730.231 Fax: 00359.2.9711049...
  • Page 98 H-2040 Budaör Tel: 0036.23.415.317 Fax: 0036.23.417.310 World-Wide Warranty Terms IRELAND : Tech. Help Desk: 01.6799016 ITALY : EPSON Italia s.p.a. Assistenza e Servizio Clienti Viale F. Lli Casiragi, 427 20099 Sesto San Giovanni (MI) Tech. Help Desk: 02.29400341 Web Address: http://www.epson.it...
  • Page 99 NETHERLANDS : EPSON Support Center BeNeLux Tech. Help Desk: 043 3515752 Web Address: http://www.epson.nl NORWAY : Tech. Help Desk: 800.11828 PORTUGAL : EPSON Portugal, S.A. Rua do Progresso, 471-1 Perafita- Apartado 5132 Tech. Help Desk: 0808 200015 Web Address: http://www.epson.pt POLAND : FOR EVER Sp.
  • Page 100 Sanayi ve TIC. A.S. Rihtim Cad. No. 201 Tahir Han TR-Karaköy-Istanbul Tel: 0090.212.2520809 Fax: 0090.212.2580804 World-Wide Warranty Terms UNITED KINGDOM : EPSON (UK) Ltd. Campus 100, Maylands Avenue Hemel Hempstead, Herts, HP2 7TJ Tech. Help Desk: 0990 133640 Web Address: http://www.epson.co.uk YUGOSLAVIA : BS Procesor d.o.o.
  • Page 101 200 Sur y 300 Oeste San Jose, Costa Rica Tel: (50 6) 296-6222 Web Address: http://www.epsoncr.com MEXICO : Epson Mexico, S.A. de C.V. AV. Sonora #150 Mexico, 06100, DF Tel: (52 5) 328-4008 Web Address: http://www.epson.com.mx U. S. A. : Epson America, Inc.

  • Page 102: South America

    Epson Argentina S.A. Avenida Belgrano 964/970 (1192), Buenos Aires Tel: (54 11) 4346-0300 Web Address: http://www.epson.com.ar BRAZIL : Epson Do Brasil Ltda. Av. Tucunare, 720 Tambore Barueri, Sao Paulo, SP 06460-020 Tel: (55 11) 7295-1757 Web Address: http://www.epson.com.br CHILE : Epson Chile S.A.
  • Page 103 <ASIA & OCEANIA> AUSTRALIA : EPSON AUSTRALIA PTY LIMITED 70 Gibbes Street Chatswood NSW 2067 AUSTRALIA Tel: 1300 361 054 Web Address: http://www.epson.com.au HONGKONG : EPSON Technical Support Centre (Information Centre) Rooms 4706-4710, China Resources Building, 26 Harbour Road, Wan Chai, HONG KONG Tech.
  • Page 104 KOREA : EPSON KOREA CO., LTD 17F HANSOL Bldg., 736-1, Yaoksam-dong Kangnam-gu, Seoul, 135-080, KOREA Tel: 2-553-3515 Fax: 2-5584271 http://www.epson.co.kr World-Wide Warranty Terms THAILAND : Epson (Thailand) Co., Ltd. 24th Floor, Empire Tower, 195 South Sathorn Road, Yannawa, Sathorn, Bangkok 10120, Thailand.

  • Page 105: Declaration Of Conformity

    Conforms to the following Directives and Norm(s) Directive 89/336/EEC Directive 73/23/EEC : SEIKO EPSON CORPORATION : 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan : EPSON EUROPE B. V. : Entrada 701, 1096 EJ AMSTERDAM, The Netherlands : LCD Projector : ELP-713/703/503/EMP-713/703/503 : EN 55022...
  • Page 106 (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name Type of Product Model : EPSON AMERICA, INC. : MS: 3-13 3840 Kilroy Airport Way Long Beach, CA 90806-2469 : (562) 290- 5254 : EPSON...

  • Page 107: Fcc Compliance Statement

    FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 109 Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON is a registered trademark and PowerLite is a trademark of SEIKO EPSON CORPORATION. General Notice: The following trademarks and registered trademarks are the property of their respective owners and are used in this publication for identification purposes only.
  • Page 110 Printed in Japan 9001869 01.08-.1A(C01)

This manual is also suitable for:

Emp-703Emp-713

Table of Contents