Basic Operations
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the power cable.
Connect using the power cable supplied.
b
Turn on the connected device, and
then turn on the projector's main
power switch.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
Lock/Control Panel Lock
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
High Altitude Mode
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
•
This projector comes with a Trigger out port to communicate the current status of the projector's power
(on/off) to external devices. When using this function, set Trigger Out.
Trigger Out
p.75
p.73
p.75
24
c
Turn the power on.
Remote control
The lens shutter opens, and projection
starts.
c
When Direct Power On is set to
On, you can start projecting by
simply turning on the main power
switch without having to press any
buttons.
Operation - Direct Power
On
p.75
Warning
Do not look into the lens during projection.
s
Signal - Auto Setup
s
Extended - Operation -
s
Control panel
Extended -
s
Settings - Child
s
Extended - Operation -
p.70