Epson EMP-715 Owner's Manual page 64

Top Sub Menu
Menu
Set- Keystone
ting
P-in-P
No-Signal Msg
Prompt
A/V Mute
Sleep Mode
Reset
Cap- Image capture
ture
User 's Logo
Capture
62 - Menu Operations
Corrects screens distorted into trapezoid shapes.
· The screen will be reduced in size when trapezoid
correction has been performed.
· The status of trapezoid correction will be recorded. Perform
readjustments that match the installation position when the
projection position or angle have been changed.
· Reduce the sharpness if blurring occurs after trapezoid
correction. (see page 60)
Sets the input source for the P in P function's sub-screen.
· The P in P function is executed by pressing the [PinP]
button. (see page 54)
The status for [No Image Signal Input] and other message
display.
· The user logo must be registered and set up before it can be
amended.
Sets whether to display the input source on the screen or not.
Sets up the screen status for when the [A/V Mute] button is
pressed.
· User logos must be registered and set up before they can be
amended.
Sets the energy-saving function for when no image signals
are being input. When this is set at [ON], projection will be
automatically ended and the projector will enter the sleep
mode if no image signals are input and no operations are
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.
Returns all setting menu adjustment values to the default
values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Select [Reset All] to return all image and sound values to the
default settings. (see page 63)
Saves the image currently being projected in the memory
card. Press the [Enter] button and perform the operations as
directed with the confirmation screen displayed.(see
page 64)
· A certain amount of time is required for the saving process.
Registers user logos. (see page 66)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
· The saving procedure requires a certain amount of time to
complete. Do not attempt to operate the projector or the
equipment connected to the projector while this procedure
is running. Failure to observe this may result in damage.
· The size that can be registered is 400 x 300 dots.
· The display size will be adjusted when video images are
being projected.
Function Default Value
Center value (0)
Composite
Blue
ON
Black
ON
-
-
EPSON's logo