Yealink SIP-T42G User Manual page 92

User Guide for the SIP-T42G IP Phone
receive another call while there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there is
an active call on the phone. You can also enable or disable the phone to play a warning
tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press
field.
3. Press
4. Press the Save soft key to accept the change or the Back soft key to cancel.
To use the call waiting:
1. When the phone receives an incoming call during a call.
The phone LCD screen displays as below:
2. Press
3. Do one of the following:
Press the Answer soft key to answer the incoming call.
-
The original call will be placed on hold.
Press the FWD soft key to forward the incoming call to another contact.
-
Press the Silence soft key to ignore the incoming call.
-
- Press More->Reject to reject the incoming call.
Press More->FWD VM to forward the incoming call to voice mail.
-
82
or , or the Switch soft key to select Enabled from the Call Waiting
or , or the Switch soft key to select Enabled from the Play Tone field.
to see the incoming call.