Yealink SIP-T42G User Manual page 78

User Guide for the SIP-T42G IP Phone
c) When the parameter Location Required is set to No on the Skype for Business
Server, the LCD screen is shown as below after login:
You can add the location information in one of the two ways:
Reload the location information from the Skype for Business Server.

Add the location information manually.

The network administrator configures geographical location on the Skype for Business
Server for the phone. After the phone signs in or reboots, the geographical location is
downloaded automatically. The phone will update the geographical location every 4
hours automatically. If the geographical location configured on the server updates, you
can also reload it via phone user interface manually.
To reload the location information via phone user interface:
1. Press Menu->Settings->Basic Settings->Location.
2. Press the Reload soft key to reload the location information from the Skype for
Business Server.
Location set on the phone will be covered by location set on the Skype for Business
Server.
If geographical location is not provisioned on the Skype for Business Server, you can
add the location information manually via phone user interface.
68