Fujitsu SRS-12I Administrator's Manual page 42

Then, press ENTER.
TOS S=7
COMPLETED
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the
option menu.
To set-up Diffserv, follow the steps below:
1. Press OPTIONS, numeric key "2", "3", then ENTER.
TOS / DIFFSERV SETTING
TOS S=4
2. Press ENTER.
ENTER ADM PASSWORD
3. Enter 8 digits of numeric Administrator password (see Administrator
Password Registration in chapter 4). Then ENTER.
ENTER ADM PASSWORD
********
*Factory default Administrator Password – 99999999
4. Press 2, then ENTER.
1: TOS
5. If Diffserv has been already set up, the last Diffserv level is displayed.
The default signaling value (101110) is set upon the shipment from the
manufacturer.
DIFFSERV SETTING
SIGNALING=101110
6. Key 6 digits of Diffserv, then press ENTER.
DIFFSERV SETTING
SIGNALING=101010
You can clear and re-enter the value by pressing CLEAR before saving the
value.
V=6
V=0
2: DIFFSERV
(SELECT 1-2)
(0-1)
(0-1)
3
3-23